IT14G Integrated Toolcarrier Caterpillar

Ride Control - If Equipped

Usage:

Travel at high speeds over rough terrain causes bucket movement and a swinging motion. The system for ride control acts as a shock absorber by absorbing forces from the bucket and by dampening forces from the bucket. This system also stabilizes the entire machine.

A manual ride control system and an automatic ride control system is available.

Show/hide table




Illustration 1	g00409320

Manual Ride Control

Show/hide table

Ride Control - Push in the top of the switch in order to turn on the system for ride control.

The ride control will smooth the ride of the machine during travel.

Push the bottom of the switch in order to turn off the system for ride control.

Automatic Ride Control

Show/hide table




Illustration 2	g00451714

Ride Control - Push in the bottom of the switch in order to turn on the system for ride control.

The ride control will smooth the ride of the machine during travel.

Push the switch to the middle position in order to turn off the system for ride control.

Show/hide table

Automatic Ride Control - Push in the top of the switch in order to turn on the automatic ride control.

The automatic ride control automatically turns on when the ground speed exceeds a preset speed of approximately 9.5 km/h (5.9 mph). The automatic ride control automatically shuts off during low speed travel mode.