IT14G Integrated Toolcarrier Caterpillar


Backup Alarm - If Equipped

Usage:

IT14G 1WN



Illustration 1g00387726



Illustration 2g00447477

The backup alarm is mounted in the upper right corner of the engine compartment.

Backup Alarm - The alarm will sound when the direction control lever is in the REVERSE position. The alarm will sound when the direction control switch is in the REVERSE position. The alarm is used to alert people behind the machine that the machine is backing up.




Illustration 3g00102228

A three-position switch at the rear of the backup alarm regulates the intensity of sound.

The alarm is set at the highest sound level when the machine is shipped from the factory. The setting should remain on high, unless the job site requires a lower intensity of sound.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.