3508, 3512 and 3516 Engines Caterpillar


Engine Design

Usage:

3508 5PW



Illustration 1g00293348

Cylinder And Valve Location

(A) Inlet valves. (B) Exhaust valves.

Number and arrangement of cylinders ... 60 degree V-8

Valves per cylinder ... 4

Displacement ... 34.5 L (2105 cu in)

Bore ... 170 mm (6.7 inch)

Stroke ... 190 mm (7.5 inch)

Compression ratio ... 13.5:1

Combustion ... Direct injection

When the crankshaft is viewed from the flywheel end the crankshaft rotates in the following direction. ... Counterclockwise

Firing order (injection sequence):

Standard rotation CCW ... 1, 2, 7, 3, 4, 5, 6, 8

Valve lash

Inlet ... 0.50 mm (.020 inch)

Exhaust ... 1.00 mm (.040 inch)

Note: The front end of the engine is opposite the flywheel end of the engine. The left and the right side of the engine are determined from the flywheel end. The number 1 cylinder is the front cylinder on the right side. The number 2 cylinder is the front cylinder on the left side.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.