IT14G Integrated Toolcarrier Caterpillar


Steering Frame Lock

Usage:

IT14G 1WN

------ WARNING! ------

No clearance for person in this area when machine turns. Severe injury or death from crushing could occur.



NOTICE

Before operating the machine, be sure the steering frame lock is disconnected and put in the storage position.


In order to place the steering frame lock link in the LOCKED position, the machine must be in the straight ahead position.



    Illustration 1g00412938

  1. Remove the locking pin (3). Remove the pin (2) which holds the steering frame lock link (1) in the STORED position.

  2. Connect the steering frame lock link (1) with the front frame.


    Illustration 2g00412859

  3. With the steering frame lock link (1) in the correct position, install the pin (2) and the locking pin (3).

In order to put the steering frame lock link in the STORED position, reverse the previous steps.

Caterpillar Information System:

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.