169-9529 Swing Cylinders (Left Cylinder for 416C, 426C and 436C and Right Cylinder for 416C, 426C and 436C)
Illustration 1 | g00298799 |
(1) Apply sealant to the threads. Tighten the nut to the following torque. ... 540 ± 30 N·m (400 ± 20 lb ft)
Tighten the nut and turn the nut for an additional 30 °± 5°.
(2) Lubricate the seal lips with a small amount of the lubricant that is being sealed.
(3) Lubricate the threads. Tighten the head to the following torque. ... 600 ± 130 N·m (440 ± 95 lb ft)
(4) Inside diameter of a new cylinder ... 101.60 ± 0.08 mm (4.000 ± 0.003 inches)
(5) Outside diameter of a new rod ... 50.750 ± 0.038 mm (1.9980 ± 0.0015 inches)
(6) Inside diameter of a new head ... 51.13 ± 0.03 mm (2.013 ± 0.001 inches)
169-9529 Swing Cylinders (Right Cylinder for 428C and 438C)
Illustration 2 | g00298799 |
(1) Apply sealant to the threads. Tighten the nut to the following torque. ... 540 ± 30 N·m (400 ± 20 lb ft)
Tighten the nut and turn the nut for an additional 30 °± 5°.
(2) Lubricate the seal lips with a small amount of the lubricant that is being sealed.
(3) Lubricate the threads. Tighten the head to the following torque. ... 600 ± 130 N·m (440 ± 95 lb ft)
(4) Inside diameter of a new cylinder ... 101.60 ± 0.08 mm (4.000 ± 0.003 inches)
(5) Outside diameter of a new rod ... 50.750 ± 0.038 mm (1.9980 ± 0.0015 inches)
(6) Inside diameter of a new head ... 51.13 ± 0.03 mm (2.013 ± 0.001 inches)
169-9530 Swing Cylinders (Left Cylinder for 428C and 438C)
Illustration 3 | g00298799 |
(1) Apply sealant to the threads. Tighten the nut to the following torque. ... 540 ± 30 N·m (400 ± 20 lb ft)
Tighten the nut and turn the nut for an additional 30 °± 5°.
(2) Lubricate the seal lips with a small amount of the lubricant that is being sealed.
(3) Lubricate the threads. Tighten the head to the following torque. ... 600 ± 130 N·m (440 ± 95 lb ft)
(4) Inside diameter of a new cylinder ... 101.60 ± 0.08 mm (4.000 ± 0.003 inches)
(5) Outside diameter of a new rod ... 50.750 ± 0.038 mm (1.9980 ± 0.0015 inches)
(6) Inside diameter of a new head ... 51.13 ± 0.03 mm (2.013 ± 0.001 inches)