3126B Engine for Caterpillar Built Machines Caterpillar


Gear Group (Front)

Usage:

120H 124



图 1g01133392

(1) 凸轮轴惰轮

轴承面前部和齿轮面前部的距离 (B) ... 0.40 ± 0.25 mm (0.016 ± 0.010 in)

新轴直径 (A) ... 80.00 ± 0.013 mm (3.1496 ± 0.0005 in)

(2) 凸轮轴齿轮

(3) 将凸轮轴惰轮的螺栓拧紧至下述扭矩。 ... 70 ± 15 N·m (50 ± 11 lb ft)

(4) 将凸轮轴惰轮 (1) 上的正时标记与凸轮轴 (2) 上的孔和曲轴齿轮 (5) 上的孔对齐。

(5) 曲轴齿轮

(6) 机油泵传动齿轮

(7) 将 9S-3263 螺纹锁固胶 涂覆到泵惰轮螺栓的螺纹上。 将螺栓拧紧至下述扭矩。 ... 70 ± 15 N·m (50 ± 11 lb ft)

(8) 机油泵惰轮

轴承面后部和齿轮面后部之间的距离 (C) ... 0.75 ± 0.25 mm (0.030 ± 0.010 in)

新轴直径 (D) ... 28.644 ± 0.013 mm (1.1277 ± 0.0005 in)

Caterpillar Information System:

3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Engine to Transmission Adapter
Installation of the Caterpillar Ignition System (CIS) on G3606 and G3608 Engines{1550} Installation of the Caterpillar Ignition System (CIS) on G3606 and G3608 Engines{1550}
Installation Procedure For The Caterpillar Ignition System (CIS) On The G3608 Engine{1550} Installation Procedure For The Caterpillar Ignition System (CIS) On The G3608 Engine{1550}
G3612 and G3616 Engines Air Inlet And Exhaust System
3126B Engine for Caterpillar Built Machines Flywheel Housing
3126B Engine for Caterpillar Built Machines Flywheel
G3612 and G3616 Engines Turbocharger - Inspect
3500B Engines for Caterpillar Built Power Modules Camshaft
G3612 and G3616 Engines Turbocharger - Clean - Cleaning with Dry Particles
3208 Marine Engine Magnetic Pickups - Clean/Inspect
3126B Engine for Caterpillar Built Machines Cylinder Block Cover Group
3126B Engine for Caterpillar Built Machines Front Housing and Covers
3500B Locomotive Engines Air Inlet and Exhaust Lines
G3612 and G3616 Engines Actuator Control Linkage - Replace
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Cold Start Strategy
322B Excavator Hydraulic System Visual Inspection
G3612 and G3616 Engines Actuator Control Linkage - Lubricate - If applicable
G3606 and G3608 Engines Cooling System Level Switch - Inspect
3054 Engine Water Temperature Regulator
3512 Industrial Engine Cooling System Coolant Analysis (Level II) - Obtain
3408E and 3412E Engines for Caterpillar Built Machines Coolant Temperature Sensor
3126B Engine for Caterpillar Built Machines Engine Oil Pressure Sensor - If Equipped
3126B and 3126E Truck Engines Boost Pressure Sensor
3126B Engine for Caterpillar Built Machines Atmospheric Pressure Sensor - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.