Vibration Damper
Show/hide table
Illustration 1 | g00456447 |
(1) Apply 4C-5593 Anti-Seize Compound to all of the bolts at assembly.
Torque for bolts ... 215 ± 40 N·m (158 ± 29 lb ft)
(2) Pulley
(3) Damper assembly
Note: The dash marks on the front of the damper assembly must be in alignment with each other. A new damper assembly will be needed if the dash marks are not in alignment.
Maximum permissible face runout of the damper assembly ... 0.00 to 2.03 mm (0.000 to 0.080 inch)
Caterpillar Information System:
3054 Truck Engine Fuel System - Prime
3054 and 3056 Industrial and Generator Set Engines Fuel Transfer Pump Strainer - Clean
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Model View Illustrations
3406E Truck Engine Speed/Timing Sensor
3208 Marine Engine Fuel Injection Nozzles - Test/Exchange
3208 Marine Engine Engine Protective Devices - Check
3508, 3512 and 3516 Engines Basic Block
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Diagnostic Flash Code Retrieval
Caterpillar Machine Fluids Recommendations Dry Brake Shoe Applications
3406E Truck Engines Inlet Air Temperature Sensor
3208 Marine Engine Engine Valve Lash - Inspect/Adjust
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Engine Description
C12 Marine Engines Air Starting
3406E and 3456 Industrial Engines Valve Mechanism
3054 and 3056 Industrial and Generator Set Engines Fuel System Secondary Filter - Replace
3406E Truck Engine Engine Oil Filter Base
3306B Industrial Engine Walk-Around Inspection
3054 and 3056 Industrial and Generator Set Engines Engine Rating Definitions
3054 and 3056 Industrial and Generator Set Engines Reference Material
3618 Engine Engine Design
3406E Truck Engine Electric Starting Motor
3618 Engine Fuel Transfer Pump
3512 and 3516 EUI Engines for Caterpillar Built Machines Air Starting System