Pressure Switch (Steering)
Show/hide table
 | |
| Illustration 1 | g00244770 |
Maximum actuation pressure at -40° to +121°C (-40.0° to +250.0°F) ... 1206 kPa (174.9 psi)
Deactuation pressure at -40° to +121°C (-40.0° to +250.0°F) ... 700 ± 103 kPa (101.5 ± 14.9 psi)
Contact positions (1) and (2) are normally open below deactuation pressure. ... 700 ± 103 kPa (101.5 ± 14.9 psi)
Contact positions (1) and (3) are normally closed below deactuation pressure. ... 700 ± 103 kPa (101.5 ± 14.9 psi)
Final installation torque for pressure switch ... 100 ± 15 N·m (73.8 ± 11.1 lb ft)
Caterpillar Information System:
994 Wheel Loader Steering System Steering Oil Temperature Switch
966G and 972G Wheel Loaders Drive Shaft Spline (Center) - Lubricate
966G and 972G Wheel Loaders Drive Shaft Universal Joints - Lubricate
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Transmission Planetary
966G and 972G Wheel Loaders Cooling System Water Temperature Regulator - Replace
3412 Generator Set Engines Electric Starting Motor
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Brake Valve (Proportional) (Traction Control System) - Install
3508B Engine for Caterpillar Built Machines Dust Ejector
966G and 972G Wheel Loaders Cooling System Level - Check
627F Wheel Tractor-Scraper Push-Pull Hydraulic System General Information
621F, 623F and 627F Wheel Tractor-Scrapers Power Train Transmission Planetary
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Brake Valve (Proportional) (Traction Control System) - Remove
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Pilot System Pressure - Test
994 Wheel Loader Steering System Steering Pilot Check Valve
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Hydraulic Tank - Remove
994D Wheel Loader Steering System Check Valve (Steering)
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Hydraulic Tank - Install
994D Wheel Loader Steering System Check Valve (Steering and Brake Oil Cooler Bypass)
631E Series II, 633E Series II and 637E Series II Wheel Tractor-Scrapers Cushion-Hitch Hydraulic System Pressure Compensator Valve (Piston Pump)
3508B Engine for Caterpillar Built Machines Alternator Mounting
938G Wheel Loader and IT38G Integrated Toolcarrier Braking System Parking Brake Alarm Relay
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Main Control Valve
784C and 785C Off-Highway Truck/Tractors VIMS Module Battery - Replace
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Relief Valve (Main) - Test and Adjust