3500B Engines for Caterpillar Built Power Modules Caterpillar


Alternator Mounting

Usage:

793B 1HL



图 1g01446906

注: 皮带轮组件 (3) 与皮带轮 (1) 之间的最大角度差为 0.4 度。

(2) 皮带轮防松螺母的扭矩 ... 110 ± 10 牛米 (80 ± 7 磅英尺)

(4) 根据 197-9087 张紧度表调节蛇形皮带的皮带张紧度 。

(5) 用少量润滑剂来润滑要密封的唇形密封件的唇口。

Caterpillar Information System:

3500 Generator Set Engines Vibration Damper
3508B Engine for Caterpillar Built Machines Accessory Drive
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
3126E and 3126B Commercial and Truck Engines Air Compressor - Inspect
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Crankcase Breather
3306B Industrial Engine Radiator Restrictions
3306B Industrial Engine After Stopping Engine
3306B Industrial Engine Manual Stop Procedure
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Oil Filter Base
3306B Industrial Engine Fuel Conservation Practices
3306B Industrial Engine Engaging the Driven Equipment
3176C and 3196 Industrial Engines Engine Warm-up
3176C and 3196 Industrial Engines Engine Oil Level - Check
3176C and 3196 Industrial Engines Fuel System - Prime
3500 Generator Set Engines Cylinder Block
3176C and 3196 Industrial Engines Fuel System Secondary Filter - Replace
3500C Marine Engines Turbocharger Exhaust Temperature Sensor
3176C and 3196 Industrial Engines Alternator and Fan Belts - Inspect/Adjust/Replace
3500B Engines for Caterpillar Built Power Modules Engine Speed Sensor
3612 and 3616 Fast Vessel Engines Safety Messages
3176C and 3196 Industrial Engines Cooling System Coolant (ELC) - Change
3176C and 3196 Industrial Engines Cylinder Head Grounding Stud - Inspect/Clean/Tighten
3306B Industrial Engine Driven Equipment - Check
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Accessory Drive (Upper Right Hand)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.