Bucket Tips - Inspect/Replace
Show/hide table
 |
Personal injury or death can result from bucket falling. Block the bucket before changing bucket tips. |
 |
- Raise the bucket. Place a block under the bucket.
- Lower the bucket to the blocking.
Do not block up the bucket too high. Block up the bucket so that the bucket is high enough to remove the cutting edges and the end bits.
- Drive the pin out of the bucket tip from the retainer side of the bucket tip. Remove the bucket tip and the retainer.
- Clean the adapter, the pin, and the retainer. Replace any damaged parts. Install the retainer in the groove.
- The bucket tip should be installed over the retainer. Install the bucket tip in the runner position or in the digger position.
- Drive the pin through the retainer, through the adapter, and through the bucket tip from the side that is opposite the retainer.
Caterpillar Information System:
120H and 135H Motor Graders Hydraulic and Steering System Blade Lift Control Valve
928G Wheel Loader Hydraulic Lever Lock Control
14H and 16H Motor Graders Hydraulic and Steering System Accumulator (Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Bucket Cutting Edges - Inspect/Replace
924Gz Wheel Loader Braking System - Test
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Valve and Linkage Group
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Operator Console
561M Pipelayer Transmission - Power Shift
IT14G Integrated Toolcarrier Backup Alarm - Test
561M Pipelayer Transmission Hydraulic Control - Power Shift
928G Wheel Loader Refill Capacities
561M Pipelayer Battery, Battery Cable or Battery Disconnect Switch - Replace
IT14G Integrated Toolcarrier Bucket Wear Plates - Inspect/Replace
120H and 135H Motor Graders Power Train Magnetic Screen (Transmission)
120H and 135H Motor Graders Power Train Gear Pump (Transmission Charging and Scavenge)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Cooling System Coolant (ELC) - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders Cooling System Coolant Extender (ELC) - Add
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Oil Filter (Power Train)
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Radiator Core - Clean
928G Wheel Loader Cooling System Water Temperature Regulator - Clean/Replace
120H and 135H Motor Graders Hydraulic and Steering System Control Valve (Blade Lift)
561M Pipelayer Transmission Controls and Parking Brake Linkage
120H and 135H Motor Graders Power Train Clutch Control (Modulation)
12H, 140H, 143H, 160H and 163H Motor Graders Power Train Pressure Switch (Transmission Modulation)