Engine Starting
If a warning tag is attached to the start switch or to the controls, do not start the engine. Also, do not move any controls.
Move the body hoist control to the FLOAT position before you start the engine.
Move the transmission control to the N position before you start the engine.
Move the parking and secondary brake control to the ENGAGED position before you start the engine.
Diesel engine exhaust contains products of combustion which can be harmful to your health. Always start the engine in a well ventilated area. Always operate the engine in a well ventilated area. If you are in an enclosed area, vent the exhaust to the outside.
Caterpillar Information System:
789C Off-Highway Truck Fuel Tank Water and Sediment - Drain
789C Off-Highway Truck Fuel System Primary Filter (Water Separator) - Drain - If Equipped
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Hydraulic Oil Contamination - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Lift Arms - Remove
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Steering System Troubleshooting
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Piston Pump (Axle Propel)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Visual Inspection
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Machine Preparation for Troubleshooting
D350E Series II and D400E Series II Articulated Trucks General Hazard Information
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Visual Inspection (Power Train)
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Machine Preparation for Troubleshooting
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Propel System Hydraulic Oil Contamination - Test
D250E Series II and D300E Series II Articulated Trucks Directional Turn Signal Control
789C Off-Highway Truck Hoist, Torque Converter and Brake Tank Oil - Change
G3B, K3A and L3A Denso Alternators Initial Troubleshooting Procedure
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Filling and Flushing the Hydrostatic System - Test
789C Off-Highway Truck Parking Brake Release Oil Filter - Replace
784C and 785C Off-Highway Truck/Tractors Engine Oil Level - Log Additions - If Equipped with the Oil Renewal System
784C and 785C Off-Highway Truck/Tractors Fuel Filter (Oil Renewal System) - Replace - If Equipped
789C Off-Highway Truck Service Brakes - Inspect
789C Off-Highway Truck Steering System Oil Level - Check
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Testing and Adjusting Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Troubleshooting Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic System - Test and Adjust