3406B DIESEL TRUCK ENGINE Caterpillar


Idler Gear Assembly (For Front Gear Group)

Usage:

2W7455 Gear Assembly Used For Water Pump and Camshaft Drive

(1) Bore in bearing of gear (after assembly) ... 63.602 ± 0.038 mm (2.5040 ± .0015 in)

Diameter of bearing surface of the shaft ... 63.500 ± 0.013 mm (2.5000 ± .0005 in)

(2) Install bearing from rear face of gear assembly to a depth of ... 1.5 ± 0.5 mm (.06 ±.02 in)

(3) Length of gear ... 47.60 ± 0.05 mm (1.874 ± .002 in)

Length of the bearing surface of the shaft ... 47.85 ± 0.05 mm (1.884 ± .002 in)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.