Fuel Injection Nozzle And Adapter (Earlier)
Usage:
(1) Nut for fuel line.
Hold adapter assembly (2) when nut (1) is loosened or tightened. Tighten nut (1) to a torque of ... 48 ± 7 N·m (35 ± 5 lb ft)
(2) Adapter assembly.
(3) Torque for bleed screw ... 2.2 ± 0.8 N·m (20 ± 7 lb in)
(4) Washer.
(5) Torque for clamp bolt ... 28 ± 4 N·m (21 ± 3 lb ft)
(6) Put liquid soap on the rubber O-ring seal and in the bore in the head before assembly.
(7) Put 5P3931 Anti-Seize Compound on the threads of the adapter before installation. Tighten the adapter to a torque of ... 205 ± 14 N·m (150 ± 10 lb ft)
Caterpillar Information System:
3406B DIESEL TRUCK ENGINE Fuel Injection Lines (Later)
3406B DIESEL TRUCK ENGINE Fuel Injection Lines (Earlier)
3406B DIESEL TRUCK ENGINE Fuel System Identification
3406B DIESEL TRUCK ENGINE Engine Design
3406B DIESEL TRUCK ENGINE Introduction
3208 DIESEL TRUCK ENGINE Reconditioning Procedures
3208 DIESEL TRUCK ENGINE Crankshaft Front Seal
3208 DIESEL TRUCK ENGINE Engine Sound Suppression
3208 DIESEL TRUCK ENGINE Starter
3208 DIESEL TRUCK ENGINE Camshaft Bearings
3208 DIESEL TRUCK ENGINE Crankshaft And Gear
3208 DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
3406B DIESEL TRUCK ENGINE Fuel Injection Nozzle And Adapter (Later)
3406B DIESEL TRUCK ENGINE Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE Fuel Injection Pump Engines With Serial Numbers 7FB1-Up, 4MG1-Up, And 5KJ1-Up
3406B DIESEL TRUCK ENGINE Fuel Injection Pump Engines With Serial Numbers 3ZJ1-Up
3406B DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE Governor
3406B DIESEL TRUCK ENGINE Switch Group (Used On Engines With BrakeSaver)
3406B DIESEL TRUCK ENGINE Governor Control Linkage
3406B DIESEL TRUCK ENGINE Ether Starting Aid
3406B DIESEL TRUCK ENGINE Fuel Ratio Control
3406B DIESEL TRUCK ENGINE Primary Fuel Filter
3406B DIESEL TRUCK ENGINE Fuel Filter Base