Automatic Timing Advance
Usage:
Remove Automatic Timing Advance
start by:
a) remove timing gear cover and oil pump
1. Remove the plug from the fuel injection pump housing and install timing pin (A).
2. While turning the crankshaft clockwise (as seen from the front of the engine), push on the timing pin (A) until it slides into the groove (slot) in the fuel injection pump camshaft.
3. Remove screw (1) and washer (2) from the end of the engine camshaft.
4. Remove the automatic timing advance (3).
Caterpillar Information System:
3208 DIESEL TRUCK ENGINE Camshaft And Gears
3208 DIESEL TRUCK ENGINE Oil Pump And Relief Valve
3208 DIESEL TRUCK ENGINE Timing Gear Cover And Oil Pump
3208 DIESEL TRUCK ENGINE Crankshaft Pulley
3208 DIESEL TRUCK ENGINE Pistons
3208 DIESEL TRUCK ENGINE Pistons
3208 DIESEL TRUCK ENGINE Connecting Rod Bearings
3208 DIESEL TRUCK ENGINE Crankshaft Main Bearings
3208 DIESEL TRUCK ENGINE Lifters
3208 DIESEL TRUCK ENGINE Piston Cooling Orifices
3208 DIESEL TRUCK ENGINE Cylinder Heads
3208 DIESEL TRUCK ENGINE Fuel Injection Nozzles
3208 DIESEL TRUCK ENGINE Automatic Timing Advance
3208 DIESEL TRUCK ENGINE Flywheel
3208 DIESEL TRUCK ENGINE Flywheel Housing
3208 DIESEL TRUCK ENGINE Crankshaft Rear Seal And Wear Sleeve
3208 DIESEL TRUCK ENGINE Crankshaft And Gear
3208 DIESEL TRUCK ENGINE Camshaft Bearings
3208 DIESEL TRUCK ENGINE Starter
3208 DIESEL TRUCK ENGINE Engine Sound Suppression
3208 DIESEL TRUCK ENGINE Crankshaft Front Seal
3208 DIESEL TRUCK ENGINE Reconditioning Procedures
3406B DIESEL TRUCK ENGINE Introduction
3406B DIESEL TRUCK ENGINE Engine Design