3054 Engine Caterpillar


Muffler

Usage:

554 1AM


Illustration 1g00295475

(1) Tighten the nuts to the following torque. ... 30 ± 7 N·m (22 ± 5 lb ft)

(2) Tighten the bolts and the nuts to the following torque. ... 55 ± 10 N·m (41 ± 7 lb ft)

Caterpillar Information System:

789B Off-Highway Truck Steering System Solenoid and Relief Valve (Steering)
3054 Engine Engine Oil Filter Base
3054 Engine Fan Drive
3054 Engine Fuel Injection Nozzles
3054 Engine Fuel Transfer Pump
3054 Engine Engine Oil Relief Valve
VFS50 and VFS70 Versatile Flotation System Rear Idler Support Pin - Replace
784B and 785B Off-Highway Truck Hydraulic System General Information
793B Off-Highway Truck Radiator Core - Clean
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Axle Housing - Disassemble
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
784B and 785B Off-Highway Truck Hydraulic System General Information
938G Wheel Loader and IT38G Integrated Toolcarrier Hydraulic System Solenoid Valve (Ride Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Pressure and Flow Compensator Valve
550, 570 and 580 Wheel Harvesters Before Starting Engine
583R Pipelayer Power Train Transmission Selector And Pressure Control Valve
VFS50 and VFS70 Versatile Flotation System Air Springs - Remove
844 Wheel Dozer Engine Starting
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Engine Oil)
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Solenoid Valve (Supply Shutoff)
3054 Engine Air Inlet and Exhaust System
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Axle Housing - Assemble
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Differential Pinion Preload - Adjust
3054 Engine Electrical System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.