928G Wheel Loader Caterpillar


Refill Capacities

Usage:

928G 6XR

Table 1
APPROXIMATE REFILL CAPACITIES 
Compartment or System  Liters  US Gallons  Imperial Gallons 
Cooling System  42  11.1  9.2 
Hydraulic Tank  70  18.5  15.4 
Fuel Tank  196  51.8  43.1 
Engine Crankcase  20  5.3  4.4 
Transmission  34  8.9  7.5 
Front Differential(1)  26  6.9  5.7 
Rear Differential(1)  26  6.9  5.7 
(1) Allow 0.5 L (0.53 qt) for the addition of 1U-9891 Hydraulic Oil Additive or 9X-2037 Additive.

Caterpillar Information System:

561M Pipelayer Battery, Battery Cable or Battery Disconnect Switch - Replace
561M Pipelayer Battery - Inspect
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Battery - Recycle
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Oil Level - Check
446B Backhoe Loader Obtain S·O·S Samples
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Air Filter Secondary Element - Replace
561M Pipelayer Engine Valve Lash and Fuel Injector Timing - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers Before Operation
TK711, TK721, TK722 and TK732 Track Feller Bunchers Engine Starting
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Engine Crankcase Breather - Clean
143H and 163H Motor Graders Mounting and Dismounting
TK711, TK721, TK722 and TK732 Track Feller Bunchers Before Starting Engine
561M Pipelayer Transmission Hydraulic Control - Power Shift
IT14G Integrated Toolcarrier Backup Alarm - Test
561M Pipelayer Transmission - Power Shift
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Operator Console
12H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System Valve and Linkage Group
924Gz Wheel Loader Braking System - Test
416C, 426C, 428C, 436C and 438C Backhoe Loaders Bucket Cutting Edges - Inspect/Replace
14H and 16H Motor Graders Hydraulic and Steering System Accumulator (Steering)
928G Wheel Loader Hydraulic Lever Lock Control
120H and 135H Motor Graders Hydraulic and Steering System Blade Lift Control Valve
IT14G Integrated Toolcarrier Bucket Tips - Inspect/Replace
IT14G Integrated Toolcarrier Bucket Wear Plates - Inspect/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.