Electric Gauges
Usage:
ENGINE OIL PRESSURE
WATER TEMPERATURE
The gauge must be heated for a minimum of 5 minutes at the center scale resistance before the check points are inspected.
Check gauges with dial face position at 30° angle back from vertical.
*For 32 volt systems, a resistor must be connected in series with the gauge to function correctly.
Caterpillar Information System:
D348 INDUSTRIAL & MARINE ENGINES Sending Unit For Engine Oil Pressure (12 V - 24 V - 32 V)
D348 INDUSTRIAL & MARINE ENGINES Sending Units For Water Temperature
D348 INDUSTRIAL & MARINE ENGINES Pressure Switches
D348 INDUSTRIAL & MARINE ENGINES Water Temperature Contactor
D348 INDUSTRIAL & MARINE ENGINES Shut-Off Solenoids
D348 INDUSTRIAL & MARINE ENGINES Starter Magnetic Switches
D348 INDUSTRIAL & MARINE ENGINES Starter Solenoids
D348 INDUSTRIAL & MARINE ENGINES Starter Motors
D348 INDUSTRIAL & MARINE ENGINES Alternator Regulator
D348 INDUSTRIAL & MARINE ENGINES Alternators
D348 INDUSTRIAL & MARINE ENGINES Flywheel Housing Runout
D348 INDUSTRIAL & MARINE ENGINES Flywheel Runout
D348 INDUSTRIAL & MARINE ENGINES 5L7441 Resistor (For Use With 32 V Systems)
D348 INDUSTRIAL & MARINE ENGINES Mechanical Gauges (Color Code Dial Face)
D348 INDUSTRIAL & MARINE ENGINES Mechanical Tachometers
D348 INDUSTRIAL & MARINE ENGINES Electric Tachometer
D348 INDUSTRIAL & MARINE ENGINES Service Meter And Tachometer Drive
D348 INDUSTRIAL & MARINE ENGINES Electric Service Meter
D348 INDUSTRIAL & MARINE ENGINES Air Starting Motors
D348 INDUSTRIAL & MARINE ENGINES Pressure Regulating Valve For Air Starting Motor
D348 INDUSTRIAL & MARINE ENGINES Hydraulic Starting Motor
D348 INDUSTRIAL & MARINE ENGINES Charging Pump For Hydraulic Starter
D348 INDUSTRIAL & MARINE ENGINES Hand Pump For Hydraulic Starter
D348 INDUSTRIAL & MARINE ENGINES Pressure Accumulator For Hydraulic Starter