768C TRACTOR & 769C TRUCK POWER TRAIN Caterpillar

(1) Distance from dowel to housing (6) ... .28 in.(7.1 mm)

(2) Depth bearing must be installed below surface of housing (6) ... .06 in.(1.5 mm)

(3) Inside diameter of bearing after installation (new) ... 1.0000 ± .0003 in.(25.400 ± 0.008 mm)

(4) Torque for bolt ... 20 ± 2 lb. ft.(25 ± 3 N·m)

(5) Install governor shaft to dimension ... 4.969 ± .005 in.(126.21 ± 0.13 mm)

NOTE: Governor Reduction valve "A" must be assembled into bore "A", governor reduction valve "B" must be assembled into bore "B", and governor reduction valve "C" must be assembled into bore "C". Install snap rings with bevel down.