Usage:
(1) Diameter of the drive shaft ... .7492 ± .0003 in.(19.030 ± 0.008 mm)
Bore of the bearing for the drive shaft ... .7508 ± .0003 in.(19.070 ± 0.008 mm)
(2) Diameter of shaft ... .627 to .628 in.(15.93 to 15.95 mm)
Bore in bearing ... .6235 ± .0005 in.(15.837 ± 0.013 mm)
(3) Diameter of the bearing surface of the pinion ... .9355 to .9360 in.(23.762 to 23.774 mm)
Bore in the bearing for the pinion ... .9375 ± .0005 in.(23.813 ± 0.013 mm)
(4) Distance between thrust surfaces of pinion bearing ... 2.586 ± .001 in.(65.68 ± 0.03 mm)
End clearance of pinion ... .004 ± .002 in.(0.10 ± 0.05 mm)
(5) Torque for bolts ... 35 lb. ft.(45 N·m)
(6) Clearance (backlash) between gear teeth when holding pinion up and gear pushed away from pinion ... .002 to .006 in.(0.05 to 0.15 mm)