Crankshaft Pulley
Usage:
Remove Crankshaft Pulley
1. Remove alternator belts.
2. Remove bolt (1) and washer (2).
3. Install tooling (A) on crankshaft pulley (3) and remove the crankshaft pulley.
Install Crankshaft Pulley
1. Put clean engine oil on the lip of the front crankshaft seal and sealing surface of the crankshaft pulley.
2. Put crankshaft pulley (1) in position on end of crankshaft.
3. Install tool (A) in pulley and tighten until the pulley makes contact with the crankshaft gear. Remove tool (A).
4. Install the original washer and bolt in the end of the crankshaft. Tighten the bolt to a torque of 460 ± 60 lb. ft. (625.6 ± 81.6 N·m).
5. Install the alternator belts. Make an adjustment to the belt tension. See the V-BELT TENSION CHART in the SPECIFICATIONS.
Caterpillar Information System:
3208 TRUCK ENGINE Pistons
3208 TRUCK ENGINE Valve Lifters
3208 TRUCK ENGINE Cylinder Heads
3208 TRUCK ENGINE Fuel Injection Nozzles
3208 TRUCK ENGINE Rocker Shafts
3208 TRUCK ENGINE Rocker Shafts And Push Rods
3208 TRUCK ENGINE Crankcase Ventilator Valve
3208 TRUCK ENGINE Valve Covers
3208 TRUCK ENGINE Water Temperature Regulators
3208 TRUCK ENGINE Water Pump
3208 TRUCK ENGINE Connecting Rod Bearings
3208 TRUCK ENGINE Crankshaft Main Bearings
3208 TRUCK ENGINE Crankshaft Front Seal
3208 TRUCK ENGINE Timing Gear Cover And Oil Pump
3208 TRUCK ENGINE Oil Pump And Relief Valve
3208 TRUCK ENGINE Camshaft And Gears
3208 TRUCK ENGINE Automatic Timing Advance
3208 TRUCK ENGINE Flywheel
3208 TRUCK ENGINE Crankshaft Rear Seal
3208 TRUCK ENGINE Crankshaft Rear Seal Wear Sleeve
3208 TRUCK ENGINE Flywheel Housing
3208 TRUCK ENGINE Crankshaft And Gear
3208 TRUCK ENGINE Camshaft Bearings
3208 TRUCK ENGINE Reconditioning Procedures