Usage:
2W8025 Flywheel
Make reference to Flywheel Runout for the correct method of flywheel inspection.
(1) Gear. Maximum temperature for installation-install with chamfer toward outside ... 316°C (600°F)
(2) Torque for the bolts that hold the flywheel to the crankshaft ... 270 ± 40 N·m (200 ± 30 lb ft)
NOTE: Put 2P2506 Thread Lubricant on threads and face of bolts before assembly.
For flywheel face runout, pilot bore runout and coupling pilot bore runout refer to the Flywheel Specification Chart.
7N3060 Flywheel
Make reference to Flywheel Runout for the correct method of flywheel inspection.
(1) Flywheel.
(2) Gear. Maximum temperature for installation-install with chamfer toward outside ... 316°C (600°F)
(3) Torque for the bolts that hold the flywheel to the crankshaft ... 270 ± 40 N·m (200 ± 30 lb ft)
NOTE: Put 2P2506 Thread Lubricant on threads and face of bolts before assembly.
For flywheel face runout, pilot bore runout and coupling pilot bore runout refer to the Flywheel Specification Chart.
4N0739 Flywheel
Make reference to Flywheel Runout for the correct method of flywheel inspection.
(1) Gear. Maximum temperature for installation-install with chamfer toward outside ... 316°C (600°F)
(2) Torque for the bolts that hold the flywheel to the crankshaft ... 270 ± 40 N·m (200 ± 30 lb ft)
NOTE: Put 2P2506 Thread Lubricant on threads and face of bolts before assembly.
(3) For flywheel face runout, pilot bore runout and coupling pilot bore runout refer to the Flywheel Specification Chart.
7W4999 Flywheel
Make reference to Flywheel Runout for the correct method of flywheel inspection.
(1) Gear. Maximum temperature for installation-install with chamfer toward outside ... 316°C (600°F)
(2) Torque for the bolts that hold the flywheel to the crankshaft ... 270 ± 40 N·m (200 ± 30 lb ft)
NOTE: Put 2P2506 Thread Lubricant on threads and face of bolts before assembly.
For flywheel face runout, pilot bore runout and coupling pilot bore runout refer to the Flywheel Specification Chart.
2W6533 Flywheel
Make reference to Flywheel Runout for the correct method of flywheel inspection.
(1) Gear. Maximum temperature for installation-install with chamfer toward outside ... 316°C (600°F)
(2) Torque for the bolts that hold the flywheel to the crankshaft ... 270 ± 40 N·m (200 ± 30 lb ft)
NOTE: Put 2P2506 Thread Lubricant on threads and face of bolts before assembly.
For flywheel face runout, pilot bore runout and coupling pilot bore runout refer to the Flywheel Specification Chart.
4P3669 Flywheel
Make reference to Flywheel Runout for the correct method of flywheel inspection.
(1) Gear. Maximum temperature for installation-install with chamfer toward outside ... 316°C (600°F)
(2) Torque for the bolts that hold the flywheel to the crankshaft ... 270 ± 40 N·m (200 ± 30 lb ft)
NOTE: Put 2P2506 Thread Lubricant on threads and face of bolts before assembly.
For flywheel face runout, pilot bore runout and coupling pilot bore runout refer to the Flywheel Specification Chart.
7E1734 Flywheel
Make reference to Flywheel Runout for the correct method of flywheel inspection.
(1) Gear. Maximum temperature for installation-install with chamfer toward outside ... 316°C (600°F)
(2) Torque for the bolts that hold the flywheel to the crankshaft ... 270 ± 40 N·m (200 ± 30 lb ft)
NOTE: Put 2P2506 Thread Lubricant on threads and face of bolts before assembly.
For flywheel face runout, pilot bore runout and coupling pilot bore runout refer to the Flywheel Specification Chart.
Flywheel Runout
Face Runout (Axial Eccentricity Of The Flywheel):
Checking Face Runout Of The Flywheel
1. Install the dial indicator as shown. Put a force on the flywheel toward the rear.
2. Set the dial indicator to red 0.00 mm (.000 in).
3. Turn the flywheel and read the indicator every 90 degrees. Put a force on the flywheel to the rear before each reading.
4. The difference between the lower and higher measurements taken at all four points is the face runout (axial eccentricity) of the flywheel. Make reference to Flywheel to find the maximum permissible runout for a particular flywheel