Electric Starting Motor
Usage:
Remove Electric Starting Motor
1. Put identification on the electric wires as to their location on the starting motor. Disconnect the wires from the motor.
2. Fasten a hoist to the starting motor. Remove nuts (2), the washers and starting motor (1) from the flywheel housing. The weight of the starting motor is 75 lb. (34 kg).
Install Electric Starting Motor
1. Fasten a hoist to starting motor (1). Make sure the gasket is in position on the flywheel housing and install the starting motor. Install the nuts and washers to hold the starting motor.
2. Connect the electric wires to their correct location on the starting motor.
Caterpillar Information System:
1693 DIESEL TRUCK ENGINE Aftercooler
1693 DIESEL TRUCK ENGINE Air Compressor
1693 DIESEL TRUCK ENGINE Oil Filter Base
1693 DIESEL TRUCK ENGINE Oil Filter Base
1693 DIESEL TRUCK ENGINE Water Pump
1693 DIESEL TRUCK ENGINE Water Temperature Regulators
1693 DIESEL TRUCK ENGINE Oil Cooler (Standard Engine)
1693 DIESEL TRUCK ENGINE General Instructions
1693 DIESEL TRUCK ENGINE Testing And Adjusting
1693 DIESEL TRUCK ENGINE Systems Operation
1693 DIESEL TRUCK ENGINE Alternators
1693 DIESEL TRUCK ENGINE Starter Solenoid
1693 DIESEL TRUCK ENGINE Fuel Ratio Control, Fuel Shutoff Solenoid
1693 DIESEL TRUCK ENGINE Fuel Ratio Control
1693 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1693 DIESEL TRUCK ENGINE Governor
1693 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
1693 DIESEL TRUCK ENGINE Fuel Transfer Pump, Fuel Priming Pump
1693 DIESEL TRUCK ENGINE Fuel Transfer Pump
1693 DIESEL TRUCK ENGINE Fuel Priming Pump
1693 DIESEL TRUCK ENGINE Accessory Drive, Turbocharger
1693 DIESEL TRUCK ENGINE Accessory Drive
1693 DIESEL TRUCK ENGINE Variable Timing Unit
1693 DIESEL TRUCK ENGINE Turbocharger