Welding Procedure
Usage:
The following specifications apply to welding ductile iron or steel to ductile iron when attaching arches, fairleads, or guarding to the winch case.
- Preparation: Attachments should be chamfered to ensure adequate penetration. Weld joints must be free of rust, scale, slag, sand, dirt, grease, oil, paint or moisture. Entire weldment should be not less than 65°F (18°C).
- Procedure: Use multi-pass welding technique (stringer bead) and follow electrode manufacturers recommendation for current, voltage, polarity and speed.
Caterpillar Information System:
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Winch Removal and Installation
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Basic Winch Operation and Troubleshooting
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Recommended Fastener Torque
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Specifications
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Recommended Oil
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Preventive Maintenance and Specifications
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Model Description
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 General Safety Recommendations
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 FOREWORD
Caterpillar Challenger 75C & 85C Agricultural Tractors Electrical System Caterpillar Challenger 75C & 85C Agricultural Tractors Electrical System
Challenger 65C ; 70C Agricultural Tractors Electrical System Challenger 65C & 70C Agricultural Tractors Electrical System
Caterpillar Challenger 75C Agricultural Tractor Electrical System Caterpillar Challenger 75C Agricultural Tractor Electrical System
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Wire Rope Installation
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Bevel Pinion and Hydraulic Pump Service
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Clutch Shaft Service
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Clutch Assembly Service
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Brake Assembly Service
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Idler Shaft Group
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Fourth Shaft Group
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Cable Drum Group
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Control Valve Service (Current Production)
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Control Valve Service (Early Production)
SERVICE MANUAL FOR WINCH MODELS PA55 & PA56 Accumulator Service
3306 ENGINE SUPPLEMENT FOR CHALLENGER 65C & 70C AGRICULTURAL Hood Assembly