Starter
Usage:
Remove & Install Starter
Start By:
a. remove right engine panel
NOTE: Put identification tags on all wires for installation purposes.
1. Remove wire (1) from starter (2).
NOTE: The photograph for step 2 was taken from the bottom of the starter.
2. Remove wire (3) and wire (4) from the starter.
3. Remove three bolts (5) and remove starter (2).
NOTE: Install the starter in the reverse order.
End By:
a. install right engine panel.
Caterpillar Information System:
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Muffler
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Counterweight
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Left Engine Panel
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Right Engine Panel
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Hood
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Tire Explosion Prevention
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Introduction
3304B & 3306B INDUSTRIAL & MARINE ENGINES Oil Pump (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES Oil Pan Plate 1302-010
3304B & 3306B INDUSTRIAL & MARINE ENGINES Oil Pan
3304B & 3306B INDUSTRIAL & MARINE ENGINES Expansion Tank & Heat Exchanger As A Unit
3304B & 3306B INDUSTRIAL & MARINE ENGINES Heat Exchanger
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Fan Guard
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Alternator V-Belts
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Air Conditioner V-Belt
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Air Conditioner Compressor Group
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Air Conditioner Compressor Group
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Alternator
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Fan
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Fan Drive Housing
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Water Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Water Temperature Regulator
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Crankshaft Pulley
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC Radiator, Oil Cooler & Condenser