Usage:
Show/hide table
|
||
Show/hide table
|
||
March 2010 |
New Sprocket Sleeves, Idlers, Belts and Kits
For Multi-Terrain Loaders
A range of Special Undercarriage Parts & Kits
are available for the following specific machine models:
247/B/B2, 257/B/B2, 267/B, 277/B/C,
287/B/C, 297C
These new sprocket sleeves receive a special heat treatment for extra resistance to abrasion and wear in all applications. Sleeves are sold individually
.
In applications where idlers are being eroded by debris, the steel idler can improve service life. The standard rubber wheels are designed to wear faster than the belts in order to prevent debris from being pushed into the belt carcass. For this reason, steel idler use in aggregates must be weighed against accelerated wear on the belt.
Rubber Tracks for Multi-Terrain Loaders are continuously updated with the latest in rubber compounds, adhesives, and construction techniques, benefiting from over 25 years of experience. All Cat Rubber Tracks are circularly molded in one piece on million dollar tooling, so they are always the correct size. Cat drive lugs are permanently molded into the belt and won?t peel off like glued-on lugs. The rubber layers and internal cords are continuous, so there are no seams to fatigue and start cracking or tearing. Special belts are available with smooth tread for light footprint on sod farms, golf courses, etc. Special wide belts are also available for lower ground pressure and improved floatation and traction.
UNDERCARRIAGE
UPGRADE KITS
305-9253 BOGIE WHEEL TUBE KIT
This kit contains Bogie
Wheel Tube Assemblies for 267/B & 277/B machines.
These new Tubes contain Heavy Duty Tapered Roller Bearings for high
strength, and Heavy Duty Metal Face Seals for superior sealing in mud and
abrasive environments. Kit
contains Bogie Wheel Tube Assemblies w/ Bogie Wheels to convert both sides of
one entire machine. Use with kit
305-9254 to replace ALL wheels on a machine.
Note: Roller Frames are not included.
305-9254 IDLER WHEEL TUBE KIT
This kit contains IDLER
Wheel Tube Assemblies for 267/B & 277/B machines.
These new Tubes contain Heavy Duty Tapered Roller Bearings for high
strength, and Heavy Duty Metal Face Seals for superior sealing in mud and
abrasive environments. Kit
contains all Idler Wheel Tube assemblies w/ Idler Wheels, Rubber Tracks and
Sprocket Sleeves necessary for one entire machine, as shown.
Use with kit 305-9253 Bogie Wheel Tube Kit to replace ALL wheels on a
machine.
305-9256 IDLER & BOGIE WHEEL TUBE KIT
This
kit contains both Idler & Bogie
Wheel Tube Assemblies for 287/B machines.
These new Tubes contain Heavy Duty Tapered Roller Bearings for high
strength, and Heavy Duty Metal Face Seals for superior sealing in mud and
abrasive environments. Kit
contains all Idler Tube Assemblies w/ Wheels, Bogie Wheel Tube Assemblies w/
Wheels, Rubber Tracks and Sprocket Sleeves necessary for one entire machine, as
shown. Note: Roller Frames are not
included.
305-9261 COMPLETE
B2 UNDERCARRIAGE
UPGRADE KIT
This kit contains the latest B2-Series
technologies. It is a complete
bolt-on solution that offers Rubber Tracks, new Drive Motors with 11% more
torque, Replaceable Wheels & Idlers Shafts with Heavy Duty Metal Face Seals and
Improved Tapered Roller Bearings, and Steel Rear Idler Wheels.
It is complete, including roller frames and all hardware to convert both
sides of an entire machine, as shown.
305-9262 B2 PARTIAL
UNDERCARRIAGE
UPGRADE KIT
This partial kit contains the latest B2-Series
technologies. It is the same as Kit
305-9261, minus the Rubber Tracks, Drive Motors, Sprockets and Drive Tables.
It offers complete bolt-on Roller Frames with Replaceable Wheels & Idlers
Shafts with Heavy Duty Metal Face Seals and Improved Tapered Roller Bearings,
and Steel Rear Idler Wheels. It
contains all hardware to convert both sides of an entire machine, as shown.
352-1130 B2 PARTIAL UNDERCARRIAGE UPGRADE KIT
This partial kit has the same features as KIT
305-9262, but also includes a pair of Rubber Tracks at a discounted price.
This is the same as Kit 305-9261, minus the Drive Motors.
It contains all hardware to convert both sides of an entire machine, as
shown.
215-4007 Guard &
Guide Kit
This kit contains a full
set of track guides to help prevent derailments towards the inside of the
machine. It contains all hardware to
convert both sides of an entire machine, as shown.
Contact Information
Christopher M. Dolan
Caterpillar Inc.
Core Components Division
Product Manager- Undercarriage Marketing
Phone: 309.578.2497
Email:
Dolan_Christopher_M@cat.com |
Toll Free:
(877) 228-2420
International: (309) 578 ? 6298
E-mail:
CIC@cat.com |
Show/hide table
|