C175 Oil&Gas Offshore Engine Caterpillar


Exhaust Temperature Is High

Usage:

C175-16 P6N
Use this procedure to troubleshoot a high exhaust temperature. Also, use this procedure if one of the following event codes is active or logged.

Table 1
J1939 Code and Description  Comments 
173-16
Engine Exhaust Gas Temperature : High - moderate severity (2) 
The calculated exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is derated.
The code is logged. 
1137-0
Engine Exhaust Gas Port 1 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1138-0
Engine Exhaust Gas Port 2 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1139-0
Engine Exhaust Gas Port 3 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1140-0
Engine Exhaust Gas Port 4 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1141-0
Engine Exhaust Gas Port 5 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1142-0
Engine Exhaust Gas Port 6 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1143-0
Engine Exhaust Gas Port 7 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1144-0
Engine Exhaust Gas Port 8 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1145-0
Engine Exhaust Gas Port 9 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1146-0
Engine Exhaust Gas Port 10 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1147-0
Engine Exhaust Gas Port 11 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1148-0
Engine Exhaust Gas Port 12 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1149-0
Engine Exhaust Gas Port 13 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1150-0
Engine Exhaust Gas Port 14 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1151-0
Engine Exhaust Gas Port 15 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
1152-0
Engine Exhaust Gas Port 16 Temperature : High - least severe (3) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 

Table 2
J1939 Code  Comments 
1137-15
Engine Exhaust Gas Port 1 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1138-15
Engine Exhaust Gas Port 2 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1139-15
Engine Exhaust Gas Port 3 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1140-15
Engine Exhaust Gas Port 4 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1141-15
Engine Exhaust Gas Port 5 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1142-15
Engine Exhaust Gas Port 6 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1143-15
Engine Exhaust Gas Port 7 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1144-15
Engine Exhaust Gas Port 8 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1145-15
Engine Exhaust Gas Port 9 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1146-15
Engine Exhaust Gas Port 10 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1147-15
Engine Exhaust Gas Port 11 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1148-15
Engine Exhaust Gas Port 12 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1149-15
Engine Exhaust Gas Port 13 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1150-15
Engine Exhaust Gas Port 14 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1151-15
Engine Exhaust Gas Port 15 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 
1152-15
Engine Exhaust Gas Port 16 Temperature : High - least severe (1) 
The cylinder exhaust temperature has exceeded the trip point for the programmed delay time.
The code is logged. 

Table 3
J1939 Code and Description  Comments 
1137-19
Engine Exhaust Gas Port 1 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1138-19
Engine Exhaust Gas Port 2 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1139-19
Engine Exhaust Gas Port 3 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1140-19
Engine Exhaust Gas Port 4 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1141-19
Engine Exhaust Gas Port 5 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1142-19
Engine Exhaust Gas Port 6 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1143-19
Engine Exhaust Gas Port 7 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1144-19
Engine Exhaust Gas Port 8 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1145-19
Engine Exhaust Gas Port 9 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1146-19
Engine Exhaust Gas Port 10 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1147-19
Engine Exhaust Gas Port 11 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1148-19
Engine Exhaust Gas Port 12 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1149-19
Engine Exhaust Gas Port 13 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1150-19
Engine Exhaust Gas Port 14 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1151-19
Engine Exhaust Gas Port 15 Temperature : Data Error 
The alarm output is activated.
The code is logged. 
1152-19
Engine Exhaust Gas Port 16 Temperature : Data Error 
The alarm output is activated.
The code is logged. 

Table 4
J1939 Code and Description  Comments 
5686-0
Engine Exhaust Gas Port #1 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5687-0
Engine Exhaust Gas Port #2 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5688-0
Engine Exhaust Gas Port #3 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5689-0
Engine Exhaust Gas Port #4 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5690-0
Engine Exhaust Gas Port #5 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5691-0
Engine Exhaust Gas Port #6 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5692-0
Engine Exhaust Gas Port #7 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5693-0
Engine Exhaust Gas Port #8 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5694-0
Engine Exhaust Gas Port #9 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5695-0
Engine Exhaust Gas Port #10 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5696-0
Engine Exhaust Gas Port #11 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5697-0
Engine Exhaust Gas Port #12 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5698-0
Engine Exhaust Gas Port #13 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5699-0
Engine Exhaust Gas Port #14 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5700-0
Engine Exhaust Gas Port #15 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 
5701-0
Engine Exhaust Gas Port #16 Difference from Average Temperature : High - most severe (3) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The engine is shutdown.
The code is logged. 

Table 5
J1939 Code and Description  Comments 
5686-15
Engine Exhaust Gas Port #1 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5687-15
Engine Exhaust Gas Port #2 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5688-15
Engine Exhaust Gas Port #3 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5689-15
Engine Exhaust Gas Port #4 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5690-15
Engine Exhaust Gas Port #5 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5691-15
Engine Exhaust Gas Port #6 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5692-15
Engine Exhaust Gas Port #7 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5693-15
Engine Exhaust Gas Port #8 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5694-15
Engine Exhaust Gas Port #9 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5695-15
Engine Exhaust Gas Port #10 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5696-15
Engine Exhaust Gas Port #11 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5697-15
Engine Exhaust Gas Port #12 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5698-15
Engine Exhaust Gas Port #13 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5699-15
Engine Exhaust Gas Port #14 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5700-15
Engine Exhaust Gas Port #15 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 
5701-15
Engine Exhaust Gas Port #16 Difference from Average Temperature : High - least severe (1) 
The cylinder exhaust temperature is higher than the average temperature for all the cylinders. The amount of deviation has exceeded the trip point for the programmed delay time.
The code is logged. 

If the engine is shutdown due to a high exhaust temperature, the power to the engine Electronic Control Module (ECM) must be cycled to restart the engine.

Probable Causes

  • Codes

  • Intake air temperature

  • Inlet air restriction

  • Engine overload

  • Deposits or leaks

Recommended Actions

Table 6
Troubleshooting Test Steps  Values  Results 

1. Check for Codes

A. Connect Cat® Electronic Technician (ET) to the service tool connector.

B. Look for active codes that are associated with the system for the event code.
 

Codes
 

Result: An associated code is active.

Repair: Troubleshoot any associated codes before continuing with this test.

Result: A -0, -15, or -16 code is active or logged.

Proceed to Test Step 2.

Result: A -19 code is active or logged.

Repair: Replace the exhaust gas temperature sensor that logged the fault code.

Verify that the repair eliminated the problem.
 

2. Check for High Intake Air Temperature

Note: A one degree increase in the intake manifold temperature will increase the exhaust temperature by approximately three degrees.

A. Refer to Troubleshooting, "Intake Manifold Air Temperature Is High" for additional information.
 

Temperature
 

Result: The intake manifold air temperature is OK.

Proceed to Test Step 3.

Result: The intake manifold air temperature is NOT OK.

Repair: Determine the cause of the high intake manifold air temperature and correct the problem.

If the problem is not resolved, proceed to Test Step 3.
 

3. Check for a Restriction in the Inlet Air System

Note: Inlet air restriction can cause uneven exhaust port temperatures. Cylinders at the front half of the engine may have exhaust port temperatures that are lower than the exhaust port temperatures for the cylinders at the rear half of the engine by 10 °C to 20 °C (18 °F to 36 °F).

A. Check the air filter restriction indicator, if equipped. Refer to the Operation and Maintenance Manual for additional information.

B. Measure the inlet air restriction for each turbocharger. Refer to Troubleshooting, "Inlet Air Is Restricted" for additional information.
 

Restriction
 

Result: The inlet air restriction is OK .

Proceed to Test Step 4.

Result: The inlet air restriction is NOT OK. An imbalance in the system is discovered.

Repair: Repair or replace damaged inlet air system components. Equalize the inlet air restriction for each of the turbochargers.

If the problem is not resolved, proceed to Test Step 4.
 

4. Check for Engine Overload

Note: When the load that is applied to the engine is too large, the engine will run in the lug condition. When the engine is running in the lug condition, engine rpm does not increase with an increase of fuel.
 

Load
 

Result: The engine is not being overloaded.

Proceed to Test Step 5.

Result: The engine is being overloaded.

Repair: Reduce engine load to an acceptable limit.

If the problem is not resolved, proceed to Test Step 5.
 

5. Check for Heavy Buildup of Deposits in the Cylinder or Internal Oil Leaks

A. Use a borescope to inspect the cylinders. Look for the following conditions:

- Deposits on the valve seats
- Deposits on the valve faces
- Deposits on the cylinder walls that are above the upper limit of the piston stroke
- Signs of internal oil leaks
 

Deposits and Leaks
 

Result: The cylinder check is NOT OK.

Repair: Repair or replace damaged components.

Verify that the repair eliminated the problem.
 

If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).

Caterpillar Information System:

C175 Oil&Gas Offshore Engine Sensor Signal (Analog, Passive) - Test
An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324} An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324}
C7.1 Engines and Generator Sets Exhaust Has Excessive White Smoke
C7.1 Engines and Generator Sets Exhaust Has Excessive Black Smoke
C7.1 Engines and Generator Sets Engine Vibration Is Excessive
C7.1 Engines and Generator Sets Engine Top Speed Is Not Obtained
C175 Oil&Gas Offshore Engine Coolant Pressure Is Low
C7.1 Engines and Generator Sets Engine Stalls at Low RPM
C7.1 Engines and Generator Sets Engine Shutdown Occurs Intermittently
C175 Oil&Gas Offshore Engine Sensor Supply - Test
C7.1 Engines and Generator Sets Engine Shutdown Occurrence
C7.1 Engines and Generator Sets Engine Overspeeds
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Filter Housing - Remove and Install
C175 Oil&Gas Offshore Engine Engine Overspeeds
C175 Oil&Gas Offshore Engine Data Link - Test
C175 Oil&Gas Offshore Engine Solenoid Valve - Test - Engine
C7.1 Engines and Generator Sets Exhaust System Contains Coolant
C7.1 Engines and Generator Sets Exhaust System Contains Fuel
C175-16 Locomotive Engines Engine Electronics
C7.1 Engines and Generator Sets Exhaust System Contains Oil
C175-16 Locomotive Engines Product Lifting
C175-16 Locomotive Engines Configuration Parameters
C175-16 Locomotive Engines Starting the Engine
C7.1 Engines and Generator Sets Fuel Consumption Is Excessive
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.