Fuel Injection Pump
Show/hide table
Illustration 1 | g06088824 |
Show/hide table
Specification for 462-1316 Fuel Injection Pump Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 1 | 8T-0106 Bolt | Tighten the injector clamp bolt to |
2 | 2 | 2Y-5829 Nut | Evenly tighten the nuts to Again evenly tighten the nuts to |
3 | 1 | 442-1754 Fuel Injector Gp | Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant.
Also lubricate the external O-ring seals lightly. |
4 | 2 | 499-6458 Stud | Evenly tighten the stud bolts to |
Caterpillar Information System:
C7.1 Marine Engine Front Cover - Install
C7.1 Marine Engine Front Cover - Remove
C175-20 Tier 4 Final Locomotive Engines Water Pump
C175-20 Tier 4 Final Locomotive Engines Electric Starting Motor
C175-16 IMO III Offshore Engine Thermostatic Valve
C175-20 Tier 4 Final Locomotive Engines Electronic Control Module
C175-20 Tier 4 Final Locomotive Engines Water Connection Group
C175-20 Tier 4 Final Locomotive Engines Vibration Damper Guard
C175-16 Engine for Off-Highway Trucks Vibration Damper
3516E Engines Camshaft - Remove
C7.1 Marine Engine Crankshaft Front Seal - Remove and Install
C175-16 Locomotive Engine Exhaust Temperature Is High
C175-16 Locomotive Engine Air Lines
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Manifold (Rail)
C175-20 Tier 4 Final Locomotive Engines Fuel Injection Lines
C175-20 Tier 4 Final Locomotive Engines Fumes Disposal Group
C175-20 Tier 4 Final Locomotive Engines Diesel Exhaust Fluid Tank
C175-20 Tier 4 Final Locomotive Engines Fastener Group (Vibration Damper)
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Maintenance Interval Schedule
C175-16 Locomotive Engine Intake Manifold Air Temperature Is High
C7.1 Marine Engine Gear Group (Front) - Remove
C175-16 Locomotive Engine Starting - Test
3516E Engines Camshaft - Install
A New Electronic Control Module Wash Out Process {1901, 1920} A New Electronic Control Module Wash Out Process {1901, 1920}