Refill Capacities
发动机润滑系统的容量包括工厂安装的机油滤清器的容量。 辅助机油滤清器系统（如有配备）需要更多的机油。 参考由辅助机油滤清器系统 OEM 提供的技术规格。
Show/hide table
| 3516E 发动机润滑系统的近似加注容量 | |
| 腔室或系统 | 3516E |
| 发动机曲轴箱 | |
为了正确保养冷却系统，必须确定冷却系统总容量。 冷却系统的总容量将随安装的设备不同而变化。 冷却系统的总容量可包括以下部件：发动机、膨胀箱、热交换器散热器和管道。
参考由 Caterpillar或安装设备的原始设备制造商（OEM）提供的规范。 在下列表格中记录冷却系统的总容量。
Show/hide table
| 3516E 发电机组冷却系统的近似加注容量 | ||||
| 发动机 | 发动机冷却系统 | 散热器 | ||
| 3516E | |
|
||
Caterpillar Information System:
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
C27 and C32 Industrial Engines Walk-Around Inspection
340F and 352F Excavators Long Reach Front Operational Checks
G3606 and G3608 Engines Prechamber Check Valve - Remove and Install
C27 and C32 Industrial Engines Overhaul (Major)
C280 Marine Engines Prelubrication Pump Problem
C280 Marine Engines Aftertreatment Identification Module - Test
G3606 and G3608 Engines Camshaft Speed Sensor - Remove and Install
C18 Generator Set Maintenance Interval Schedule - Standard
C18 Generator Set Maintenance Interval Schedule - Standby Generator Sets
C280 Marine Engines Speed Control - Test
3516E Generator Sets Generator Bearing - Replace
C8.7 Marine Engine Oil Line (Supercharger) - Remove and Install
G3606 and G3608 Engines Piston Cooling Jets - Remove and Install
C7.1 Marine Engine System Overview
C7.1 Marine Engine Indicator Lamps
C18 Marine Generator Set Maintenance Interval Schedule
2015/08/18 Improved Routing is Now Used for the Seat Suspension Harness in TLV2 Seat Suspensions on Certain Machines {1408, 7312, 7324}
G3606 and G3608 Engines Gas Pressure Regulator - Remove and Install
HPU300 Hydraulic Power Pack Plate Locations and Film Locations
2015/09/25 A New Heat Shield Is Available for Certain 3512C Locomotive Engines {1067}
3500 Generator Sets with Dynamic Gas Blending Plate Locations and Film Locations
C7.1 Commercial Marine Engine System Configuration Parameters