390F Excavator Machine System Caterpillar


Track Roller (Single Flange)

Usage:

390F FEH


Illustration 1g03655140
Typical example

Table 1
Item  Qty  Part  Specification Description 
Surfaces must be clean and free of paint and protective coating before assembly. 
176-5332 Duo-Cone Seal Gp  The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin layer of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. 
9W-2146 Plug  Apply blue Loctite 242 to threads.
Torque to 25 ± 3 N·m (221 ± 27 lb in)
442-1643 O-Ring Seal  Lubricate the bore with the lubricant that is being sealed. 
442-1643 O-Ring Seal  Lubricate the bore with the lubricant that is being sealed. 
End play for the track roller shaft(1):
Minimum end play is 0.25 mm (0.010 inch).
Maximum end play is 1.25 mm (0.049 inch)
(1) Applicable only for the part number 529-7106

Caterpillar Information System:

330F MHPU Mobile Hydraulic Power Unit Machine System Swing Motor - Rear
390F Excavator Machine System Track Roller
390F Excavator Machine System Recoil Spring
C13 Tier 4 Final Engines Engine Oil Pump
390F Excavator Machine System Front Idler
C9.3 Tier 4 Final Engines Cylinder Head Valves
330F MHPU Mobile Hydraulic Power Unit Machine System Swing Motor - Front
390F Excavator Machine System Travel Motor Lines
C13 Tier 4 Final Engines Fan Drive
3512C HD and 3516C HD IPP Rental Power Modules Sensor Signal (PWM) - Test
G3306B Generator Sets Valve Stem Projection - Measure/Record
336 and 336 GC Excavator Emissions Certification Film
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
C9.3 Tier 4 Final Engines Electric Starting Motor
Testing the Diesel Particulate Filter (DPF) for Cracks and Leaks for C7.1 Engines{108F} Testing the Diesel Particulate Filter (DPF) for Cracks and Leaks for C7.1 Engines{108F}
C9.3 Tier 4 Final Engines Turbocharger
C9.3 Tier 4 Final Engines Diesel Exhaust Fluid Tank
390F Excavator Machine System Fuel Filter Lines
390F Excavator Machine System Swing Motor Lines
Installation of the 419-0893 Solenoid Valve Gp for Certain G3500 Petroleum Engines{1274, 5479} Installation of the 419-0893 Solenoid Valve Gp for Certain G3500 Petroleum Engines{1274, 5479}
2014/03/28 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04 New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
C9.3 Marine Auxiliary Engines Model View Illustrations
390F Excavator Machine Systems Main Control Valve - Assemble - Bucket and Boom
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.