Hydraulic Filter (Pilot)
Show/hide table
Illustration 1 | g02139999 |
(1) Pilot oil filter |
The oil delivery from the pilot pump flows through pilot oil filter (1) and into the components in the pilot system.
Show/hide table
Illustration 2 | g03409462 |
(1) Pilot oil filter
(2) Filter element (3) Bypass relief valve |
Filter element (2) in pilot oil filter (1) removes contaminants from the pilot oil.
The flow of pilot oil through filter element (2) may become restricted if the pilot oil is cold. Pilot oil flow may also become restricted due to contaminants in filter element (2). If the flow becomes restricted, the oil bypasses filter element (2) through bypass relief valve (3). Bypass relief valve (3) is built into the base for the pilot oil filter.
Caterpillar Information System:
2013/12/20 New Turbocharger Groups Are Used on Certain 3500B Engines {1052}
390F MHPU Mobile Hydraulic Power Unit Fuel Transfer Pump (Refueling) - If Equipped
2013/07/30 New Service Meter Kit Is Now Used on Certain 3306B Engines, and 3406C Generator Sets {7478}
C13, C15, and C18 Generator Set Engines Housing (Front)
349F and 352F Excavators Hydraulic System Counterweight (Removal and Installation Hydraulic System)
349F and 352F Excavators Machine System Return Hydraulic System
349F and 352F Excavators Hydraulic System Oil Makeup (Travel System)
349F and 352F Excavators Hydraulic System Travel Parking Brake
3512E Petroleum Engine Solenoid Valve - Test
349F and 352F Excavators Machine System Travel Motor
2013/08/05 New Alternator Guards are Used on Certain 3500 Engines {7174}
349F and 352F Excavators Machine System Solenoid Valve (Fine Swing) - If Equipped
349F and 352F Excavators Machine System Main Hydraulic Pump
3512E Petroleum Engine NOx Reduction System (NRS) - Test
349F and 352F Excavators Machine System Boom Drift Reduction Valve
349F and 352F Excavators Hydraulic System Stick Drift Reduction Valve
2013/08/05 New Alternator Guards are Used on Certain 3500 Engines {7174}
C15 and C18 Industrial Engines Turbocharger - Remove and Install - Low Pressure, For Series Turbocharger Applications
C15 and C18 Industrial Engines Turbocharger - Remove and Install
C15 and C18 Industrial Engines Turbocharger - Remove and Install - High Pressure, For Series Turbocharger Applications
349F and 352F Excavators Machine System Pilot Valve (Travel)
2013/07/25 Improved Air Inlet Heater Relays Are Now Used On Certain C7 and C9 Industrial Engines {1090, 1408}
C32 Marine Engine Turbocharger Turbine Temperature Is High
C13, C15, and C18 Generator Set Engines Fan Drive