1991/08/01 Caterpillar


New Water Temperature Regulator (With Internal Vent Valve), Regulator Housing, Pipe, And Gasket In Water Lines Group

Usage:


3116 (7SF) Truck Engines

Description of Change: A new water temperature regulator with an internal vent valve (jiggle valve), a new gasket, regulator housing, and pipe are used in the water lines group. This change eliminates the need for the external plastic vent valve.

Adaptable To:

The chart and illustration identify the new components in the 9Y6687 Water Lines Group. The new components are in effect with 3116 Truck Engine 7SF12503.

For 3116 Truck Engines 7SF1-12502, the former 9N5121 Regulator and 9Y9893 Gasket can be directly replaced with the new 7E5254 Regulator and 4P2684 Gasket. The former regulator housing and pipe do not have to be replaced to use the new regulator and gasket.


Location of new components in the 9Y6687 Water Lines Group.

Caterpillar Information System:

1991/08/01 New Fuel Injection Lines Used On 3306B (63Z) Truck Engines
1991/08/01 Fuel System Parts Information
1991/08/01 Fuel Nozzle Orifice Erosion
1991/08/01 California Laws Target Excessive Smoke
1991/08/01 Service Tips For Cleaning Air-to-air Aftercooling Systems
1991/08/01 Service Tips For Turbocharger Removal And Installation
1991/07/01 Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01 New Exhaust Manifold Gasket Available
1991/07/01 New Crankshaft Seal Groups Provide Increased Protection From Dirt And Dust
1991/07/01 Full Load Setting (FLS) And Full Torque Setting (FTS) Should Be Correctly Programmed
1991/07/01 New Dual Service Program Module (SPM) Available
1991/07/01 Correct Adjustments And Installation Procedure For Engine Speed Timing Sensor
1991/08/01 New Hose Used To Connect Turbocharger Compressor Outlet To Air To Air Aftercooler (ATAAC) Inlet Tubing
1991/08/01 Initial Valve Lash Checking Interval Changed
1991/08/01 List Of Service Publications
1991/09/01 Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/09/01 Sintered Bronze Replacement Bushings For Delco-Remy Electric Starting Motors Do Not Require Machining
1991/09/01 Always Use A Digital Voltmeter For Battery Testing
1991/10/01 New Locking Bolt Used In Flywheel Groups
1991/10/01 How To Repair Oil Leaks Between Front Housing And Spacer Deck
1991/10/01 New Components Used In Fuel Injection Pump Groups
1991/10/01 New Teflon Coated 4P9388 Cylinder Seal Available
1991/10/01 7S3161 Valve Lifter Has Three Different Designs
1991/10/01 No Gaskets Used With Aluminum Flywheel Housings
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.