Heat Exchanger - Assemble
- Install core assembly (7), then install o-ring (8), spacer (9), and bolts (10).
- Install o-ring (11), outlet bonnet (12), and bolts (13.)
Show/hide table
Illustration 2 g03124965 - Install o-ring (6), plate (5), and bolts (4).
- Install o-ring (3), bonnet (2), and bolts (1).
- Tighten bolts (13) to a torque of
15 - 18 N·m (11 - 13 lb ft) . - Tighten bolts (10) to a torque of
5 - 7 N·m (44 - 62 lb in) . - Tighten bolts (1) to a torque of
15 - 18 N·m (11 - 13 lb ft) . - Tighten bolts (4) to a torque of
5 - 7 N·m (44 - 62 lb in) .
- Tighten bolts (13) to a torque of
Show/hide table
| |
| Illustration 1 | g03124619 |
Caterpillar Information System:
C13, C15, and C18 Tier 4 Final Engines Exhaust Diffuser Adapter
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Event Codes
UPS 250 and UPS 300 Uninterruptible Power Supplies Device Bus Network
C9.3 Tier 4 Final Engines Flywheel
C9.3 Tier 4 Final Engines Electric Starting Motor
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Solenoid Valve - Test
Alignment Procedure for Certain G3500 Generator Set Engines with Gearbox {7002} Alignment Procedure for Certain G3500 Generator Set Engines with Gearbox {7002}
C18 Marine Engines Heat Exchanger - Disassemble
C7.1 Industrial Engine Flexible Exhaust Pipe
UPS 250 and UPS 300 Uninterruptible Power Supplies General Hazard Information
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Diagnostic Trouble Codes
C7.1 Engines for Caterpillar Built Machines Alternator
CEM Locomotive Aftertreatment Diesel Exhaust Fluid Nozzle - Inspect/Clean
CEM Locomotive Aftertreatment Exhaust Inlet Nitrogen Oxide Sensor - Replace
2012/07/13 A New Replacement Gas Regulator Is Available for G342, G343, G353, G379, G398, and G399 Engines {1000, 1270}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Service Tools
CEM Locomotive Aftertreatment Exhaust Outlet Nitrogen Oxide Sensor - Replace
C32 Marine Engines Closed Crankcase Ventilation (CCV) System
CX48-P2300 Petroleum Transmission Power Train Electronic Control System Connector Locations
CX48-P2300 Petroleum Transmission Power Train Electronic Control System General Information
C18 Marine Engine Engine Oil Sample - Obtain
C13, C15, and C18 Tier 4 Final Engines Air Inlet Elbow
3412 Generator Set Engines Cylinder Head Valves
2012/07/19 Water Pump Operation on C7.1, C6.6, and C4.4 Engines {1361}