1985/05/01 Caterpillar


3406 Engine Overhaul Specials

Usage:


Now, for a limited time, you can take advantage of the latest technology available for your 3406 Truck Engine and save money at the same time.

Take a look at these product improvements and how they can help you:

Copper Bond Bearings

These bearings virtually eliminate the need for future bearing roll-ins - provided the recommended maintenance guidelines are followed.

Remanufactured Cylinder Packs

Factory assembled packs reduce downtime. Improved wide ring pistons reduce ring breakage.

Remanufactured Fuel Ratio Controls

Improved parts provide longer service life and better response.

Remanufactured Di Engines

These engines give all of the above improvements plus improved engine performance and decreased fuel costs.

There are three ways to save:

1. 3406 PC or DI Owners: Buy a bearing roll-in and receive one main bearing and one rod bearing FREE ... SAVING $25.
2. 3406 PC Owners: Trade for a Remanufactured 3406 DI Engine and SAVE $400 on upgrade charges.
3. 3406 DI Owners: Buy an in-frame overhaul and get one cylinder pack and one fuel ratio control FREE ... SAVING $260.

Remember, all of these products have the latest design improvements built into them. This, coupled with the fact that this Special features all the latest Caterpillar Remanufactured Products (which save you even more money and carry the same national warranty as new), truly makes this a VALUE PACKED SPECIAL OFFERING.

Offer good from June 1 thru September 1, 1985. See the advertisement in this issue and your Caterpillar dealer for more details.

Caterpillar Information System:

1985/05/01 Constant Torque Hose Clamps Available For General Use
1985/05/01 New Bearing Housings Available For Turbochargers
1985/05/01 Information For Ordering Kpa Or Dual Scale Gauges
1985/05/01 Visual Inspection Can Detect Chrome Plated Engine Valves
1985/05/01 Be Sure Correct Piston Rings Are Used On 3400 Series Engines
1985/05/01 Check For Interference Between Water Temperature Regulator And Cylinder Head Bore
1985/04/01 Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01 Changes To Exhaust Manifolds Help Prevent Broken Studs
1985/04/01 New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01 Hardened Spacers Help Keep Bolts Tight
1985/04/01 Use Of Fuel Injection Timing Information In The "Fuel Setting And Related Information" Microfiche
1985/04/01 Changes To Naturally Aspirated Truck Engines For 1985
1985/05/01 Remanufactured Fuel Ratio Controls Are Available In U.s. And Canada
1985/05/01 Installing New Copper Bonded Bearings Can Extend Engine Life
1985/06/01 Inspection And Installation Procedures For Water Pump Shaft And Seals
1985/06/01 New Oil Seal And Coolant Seal Group Improve Service Engine Water Pump
1985/06/01 Preventing Skin Irritation From Petroleum Test Fluids
1985/06/01 Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings
1985/06/01 Air Conditioner Compressor Mounting Bracket Improved
1985/06/01 Higher Torque Can Be Used With 6V6980 Nozzle Puller Group
1985/06/01 New Service Tools Available
1985/06/01 New Temperature Recorder Group (crayons) Indicate Surface Temperature
1985/06/01 Excessive Antifreeze Concentrations Can Cause Overheating
1985/06/01 Incorrect Air Compressor Installation Can Cause An Early Failure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.