Vibration Damper
Show/hide table
Illustration 1 | g02849382 |
Show/hide table
Specification for 8N-7182 Damper Gp | |||
Item | Qty | Part | Specification description |
The alignment mark on the crankshaft (1) must be aligned with the alignment mark on the damper adapter (2). | |||
3 | 6 | 8S-4757 Bolt | Before assembly, lubricate the threads of the bolts with molybdenum disulfide base lubricant. |
Torque to |
Caterpillar Information System:
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Sight Gauge - Clean
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Oil Level - Check
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Oil - Change
C9 Marine Generator Set Severe Service Application
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Flywheel - Clean
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Battery - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Air Filter Element - Clean/Replace
C175-16 Marine Engines Fuel System Primary Filter/Water Separator - Drain
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Modes Of Operation
3500B Engines Accessory Drive (Upper Left Hand)
C11 and C13 Engines Flywheel Housing Cover
3508C, 3512C and 3516C Locomotive Engines Piston and Rings
3500C Marine Engines Stub Shaft (Front)
3508C, 3512C and 3516C Locomotive Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
3508C, 3512C and 3516C Locomotive Engines Engine Oil Lines
C15 and C18 Engines for Caterpillar Built Machines Fuel Transfer Pump
C15 and C18 Engines for Caterpillar Built Machines Air Cleaner
C175-16 Marine Engine Fuel Filter Housing
3500 Engines Turbocharger
C175-16 Marine Engine Prelubrication Oil Pump
C175-16 Marine Engine Fuel Transfer Pump
C175-16 Marine Engine High Pressure Fuel Rails
C175-16 Marine Engines Gauges and Indicators
C175-16 Marine Engine Flow Limiter