Separate Valve Stem Gauges Available
Usage:
All Caterpillar Truck Engines
The valve stem gauges in the 6V0087 Valve Stem Gauge group are now available separately. Formerly, these gauges had to be ordered as a group.
Illustration 1. 6V0087 Valve Stem Gauge Group
Illustration 2. Location of dimensions A and B.
Order Form SEHS7758 (instruction card) and the 5P4227 Tag Holder separately; these are included in the group but not with separate gauges.
See the chart that follows for correct gauge part numbers and acceptable dimensions. Remember that it is often difficult to measure slots with accuracy with other measuring tools.
Caterpillar Information System:
1982/06/23 Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings
1982/06/23 Use New 6V4910 Clamp-on Ammeter For Easier Electrical Current Measurement
1982/06/23 Improved Water Separator Group Used
1982/06/23 List Of Main And Connecting Rod Bearings Currently Available
1982/06/23 New Address For Repair Of Diagnostic Tools
1982/06/23 Carbon Cutting On Piston Top Land
1982/06/23 Wrong Water Separator Element Will Not Remove Water
1982/06/23 Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/06/23 List Of Service Publications
1982/06/23 New Seal Used In Turbocharger Mounting; Check Mount Casting For Clearance
1982/06/23 Fuel Ratio Control Is Now Available As A Group
1982/05/19 Use Correct Part Numbers For Main And Connecting Rod Bearings
1982/06/23 New Piston Group Has A Thicker Top Ring
1982/06/23 New, Improved Impeller Used In Water Pump
1982/06/23 Calibration Fluid For Fuel Injection Test Equipment Available
1982/09/01 New Compression Ring Available For Control Of Excessive Oil Consumption
1982/09/01 Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01 List Of Service Publications
1982/09/01 Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1982/09/01 New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/01 Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/09/01 Improved Gasket Available For Engine Oil And Brakesaver Oil Cooler
1982/09/01 Use Correct Torque To Prevent Broken Rocker Arm Shafts
1982/09/01 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service