Gear Pump (Rear Axle Lubrication) - Remove and Install
拆卸步骤
- 拆下后桥机油齿轮马达。
- 将差速器中的机油放到适当的容器中,以便存放或处置。 请参考操作和保养手册, "差速器和终传动油 - 更换"。
- 将适当的起吊设备连接到齿轮泵 (1) 上。 齿轮泵 (1) 的重量约为 45 kg (100 lb)。
Show/hide table
图 1 | g02116753 |
- 拆下螺母 (2) 、螺栓 (3) 和螺栓 (4) 。
- 卸下齿轮泵 (1) 。
- 拆下 O 形密封圈 (5) 和 O 形密封圈 (6) 。
Show/hide table
图 2 | g02117155 |
安装步骤
- 按相反顺序安装齿轮泵 (1) 。
- 拧紧螺母 (2) 至扭矩为 65 ± 10 N·m (48 ± 7 lb ft)。
Caterpillar Information System:
C9.3 Tier 4 Final Engines Fuel Filter Base
2010/03/22 A Procedure to Properly Torque the Fittings on the Fuel Manifold Group on Certain C13 and C15 On-Highway Truck Engines Is Available {1274, 1380, 1702}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258} Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
2010/10/08 A Slave Relay Should be Used for Customer Connections to EMCP 3 On Certain Generator Sets {4490}
C13 Industrial Engines Pressure Sensor (NRS Absolute)
2010/03/10 A New Screw Is Available for the Rocker Arm Assemblies of Some Machine Engines {1123}
2010/03/12 A New Screw Is Available for the Rocker Arm Assemblies of Some Commercial Engines {1123}
2010/03/09 A New Screw Is Available for the Rocker Arm Assemblies of Some Truck Engines {1123}
C27 and C32 Tier 4 Engines Pressure Sensor (NRS Differential)
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Assemble
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Disassemble
C15 and C18 Industrial Engines Water Temperature Regulator Housing - Remove and Install - For Series Turbocharger Applications
EMCP4.3/4.4 Data Link
TH55FT-E70 and TH55FT-E90 Transmissions Component Location
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Disassemble
797F Off-Highway Truck Power Train Gear Pump (Rear Axle Lubrication) - Assemble
C13 Industrial Engines Temperature Sensor (NOx Reduction System) - Cooled Diesel Exhaust Gases
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pump
C13, C15, and C18 Tier 4 Interim Engines Configuration Parameters
C11 and C13 Engines Piston and Rings
C175-16 Petroleum Generator Set Engines Monitoring System
2013/01/16 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
2010/06/25 New Liner Seals Are Used and Inserts Are Available for All 3500 Engines {1201}
C15 Petroleum Generator Set Engines Speed/Timing Sensor