Engine Oil Pump - Remove and Install
Removal Procedure
- Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
- Remove bolts (1) and elbow (2) .
Show/hide table
Illustration 1 | g02174574 |
- Disconnect hose assembly (3) .
- Remove bolts (4) and bolts (5) . Remove manifold (6) and couplings (7) .
Show/hide table
Illustration 2 | g02174551 |
- Remove bolts (9) and engine oil pump (8) .
Show/hide table
Illustration 3 | g03894536 |
Installation Procedure
- Install engine oil pump (8) in reverse order of removal.
Note: Lubricate all O-ring seals during installation with the lubricant that is being sealed.
Caterpillar Information System:
C13 Engines for Caterpillar Built Machines Water Pump - Remove and Install
2009/03/01 An Improved Cylinder Pack Is Now Available for 3406E, C15 and C-15 On-Highway Truck Engines with High Load Applications {1225, 1239}
C13 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
Replacement Tube Assembly{1261, 1274} Replacement Tube Assembly{1261, 1274}
C13 Engines for Caterpillar Built Machines Electronic Unit Injector - Remove and Install
Replacement Tube Assembly{1261, 1274} Replacement Tube Assembly{1261, 1274}
C6.6 Industrial Engine Speed/Timing Sensor
C7.1 Engines for Caterpillar Built Machines Engine Oil Cooler
2009/07/06 New Main Control Valves are Now Available {5051}
795F AC and 795F AC XQ Off-Highway Trucks Welding on Electric Drive Machines
An Additional Fuel Filter is Available for Certain C4.4 and C6.6 Engines{1261} An Additional Fuel Filter is Available for Certain C4.4 and C6.6 Engines{1261}
G3500B Engines Air Lines
C6.6 Industrial Engine Engine Oil Pan
2009/03/23 Setting the Trip Point for High Boost Pressure {1901, 1920}
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine Oil Pump - Disassemble
725C2, 730C2 Articulated Truck LRC Engine Supplement Engine Oil Pump - Assemble
2009/05/11 A New Gasket Improves the Sealing between the Exhaust Manifold and the Cylinder Head on Some 3500 Machine Engines {1100}
Storage Procedure for Caterpillar Products {0355, 1000, 7000} Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Using the Air Compressor Unloader Kit for On-Highway Engines{1803} Using the Air Compressor Unloader Kit for On-Highway Engines{1803}
G3500 Generator Sets Crankshaft Vibration Damper - Inspect - 1500 RPM G3520 engines (if equipped with an oil fed damper)
C175-16 Locomotive Engine Engine Misfires, Runs Rough or Is Unstable
C13 Engine for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
3500 Industrial Engines Exhaust Flange