Illustration 1 | g06235751 |
Illustration 2 | g06235755 |
The tilt cylinder is a position sensing cylinder.
Illustration 3 | g06235757 |
Illustration 4 | g06235760 |
Illustration 5 | g06236253 |
Implement pump is located in line with the power train pump.
Reference: Refer to Systems Operation , "Piston Pump (Implement)" for more information on the implement pump.
Illustration 6 | g06236286 |
The valve bank is located behind the hydraulic tank.
Reference: Refer to Systems Operation , "Bank Valve (Implement)" for more information on the valve bank.
Illustration 7 | g06236302 |
The hydraulic oil tank is located in the front of the machine.
Reference: Refer to Systems Operation , "Hydraulic Tank and Filter" for more information on the hydraulic tank.
Illustration 8 | g06236305 |
The pilot accumulator is located underneath the floor panel of the cab on the right side of the machine.
Reference: Refer to Systems Operation , "Accumulator (Pilot)" for more information on the pilot accumulator.
Illustration 9 | g06236314 |
The hydraulic oil cooler is mounted on the right side of the machine next to the radiator in the rear of the engine compartment.
Reference: Refer to Systems Operation , "Hydraulic Oil Cooler" for more information on the hydraulic oil cooler.
Illustration 10 | g06236657 |
Reference: For more information on the implement lockout switch see Operation and Maintenance Manual, SEBU8565, "Operator Controls".
Reference: Refer to the Operation and Maintenance Manual for more information on the following controls.
- Implement lift and tilt controls
- Multipurpose bucket controls
- Ripper controls