CX28 On-Highway Transmission Caterpillar


Control Manifold - Remove

Usage:

CX28 T3X

拆卸步骤

表 1
所需工具    
工具     零件号     零件名称     数量    
A     138-7573     连接支架     3    
B     1P-2420     变速箱修理架     1    
C     185-3630     带式扳手总成     1    

注: 清洁度是一项重要的因素。 在开始拆卸步骤之前,应彻底清洁部件外部。 这样有助于防止污垢进入内部机构。

注: 为便于安装,在所有线束组件上作出识别标记。


注意

在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。

有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。

按照本地法规和条例处置所有液体。



注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。





    图 1g01364812

  1. 将工具 (A) 和适当的起吊设备连接到变速箱 (1) 上。 变速箱 (1) 的重量约为 340 kg (750 lb)。 使用工具 (A) 和适当的起吊设备将变速箱 (1) 定位到工具 (B) 上。



    图 2g01364803

  1. 拆下螺栓 (2) 、盖 (3) 和 O 形密封圈 (4) 。 从控制歧管 (7) 上卸下滤网和磁性滤清器 (5) 。

  1. 如有必要,拆卸滤清器组件 (6) 和 O 形密封圈。 使用工具 (A) 拆卸滤清器组件 (6) 。



    图 3g01364830

  1. 断开线束组件 (10) 。

  1. 拆卸螺栓 (8) 和螺栓 (9) 。 拆卸控制歧管 (7) 。

Caterpillar Information System:

C9 Agricultural Engine for Challenger Tractors Coolant Level - Test
C9 Agricultural Engine for Challenger Tractors Cat Data Link - Test
C9 Agricultural Engine for Challenger Tractors CAN Data Link - Test
Separation of the Ignition Transformer on G3500 Generator Sets and G3600 Engines{1550} Separation of the Ignition Transformer on G3500 Generator Sets and G3600 Engines{1550}
C9 On-highway Engine Relief Valve (Fuel) - Remove and Install
C13 and C15 On-Highway Engines Diesel Particulate Filter - Clean
2007/04/09 Ordering Process for a Variable Consist Wire Harness {1408}
C7 and C9 On-highway Engines Diesel Particulate Filter - Clean
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1405 - FMI 03
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1405 - FMI 06
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1405 - FMI 05
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1404 - FMI 06
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1406 - FMI 03
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1406 - FMI 05
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1406 - FMI 06
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1407 - FMI 03
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1407 - FMI 05
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1407 - FMI 06
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1408 - FMI 03
C13 and C15 On-highway Engines ARD Purge Air - Test
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1408 - FMI 05
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1408 - FMI 06
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1409 - FMI 03
TA19 and TA22 Transmissions Power Train Electronic Control System MID 039 - CID 1409 - FMI 05
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.