Tilt Cylinder
Show/hide table
Illustration 1 | g06313884 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | 1 | 128-9260 Bushing | Out side diameter is Thickness is |
2 | 1 | 170-9846 Buffer Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
3 | 1 | 216-0004 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
4 | 1 | 165-9288 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
5 | - | - | Before assembly, apply green Loctite 609 to the wiper seal groove. |
6 | 1 | 1V-8242 Bushing | Bore is Installation depth is |
7 | 2 | 179-9771 Ring | Lubricate inside diameter and out side diameter with clean grease. |
8 | 1 | 495-8200 Seal Ring As | Lubricate inside diameter and out side diameter with clean grease. |
A | 1 | 382-7985 Tilt Cylinder As | Bore is |
B | 1 | 382-7994 Rod As | Diameter is |
C | 1 | 382-7983 Head | Bore over two lands is |
9 | 1 | 7Y-4622 Locknut | Before assembly, apply 8T-9579 Oil to the face and threads.
Torque to |
10 | 1 | 150-5884 Ring | Lubricate inside diameter and out side diameter with clean grease. |
11 | 8 | 7Y-5215 Bolt | Torque to |
12 | 1 | 1V-8242 Bushing | Bore is Installation depth is |
Caterpillar Information System:
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Suction Fan
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Suction Fan
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
953K and 963K Track-Type Loaders Fuel System - Prime
2014/03/31 A New Headliner, Dash, and Platform are Now Used on Certain D8R Track-Type Tractors {7253, 7329, 7451}
953K and 963K Track-Type Loaders Ether Starting Aid Cylinder - Replace
980L Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Differential and Bevel Gear
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Output Transfer Gears
950 GC Wheel Loader Machine Systems Bucket - Remove
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Rated Load
844K Wheel Dozer System Schematic
953K and 963K Track-Type Loaders Fuel System Water Separator - Drain
953K and 963K Track-Type Loaders Fuel Tank Cap and Strainer - Clean
953K and 963K Track-Type Loaders Fuel Tank Water and Sediment - Drain
844K Wheel Dozer Wiring Harness (Open Circuit) - Test
844K Wheel Dozer Wiring Harness (Short Circuit) - Test
844K Wheel Dozer Sensor Supply - Test
844K Wheel Dozer Operator Control Switch (Switch to Ground) - Test
844K Wheel Dozer Relay - Test
953K and 963K Track-Type Loaders Hydraulic System Oil - Change
953K and 963K Track-Type Loaders Hydraulic System Oil Level - Check
953K and 963K Track-Type Loaders Hydraulic Tank Breather - Replace