C13, C15, and C18 Tier 4 Final Engines Caterpillar


Engine Oil Filter Base

Usage:

826K 232


Illustration 1g02678338
Bolt tightening sequence for oil filter base

Table 1
Specification for 363-7616 Engine Oil Filter Gp 
Item  Qty  Part  Specification Description 
1R-1808 Engine Oil Filter  Apply clean lubricating oil to the gasket of the engine oil filter. 
Tighten the 209-7291 Oil Filter Base As bolts in a numerical sequence as shown in the Illustration 1 to the standard torque. 


Illustration 2g02678340


Illustration 3g02678341

Table 2
Specification for 363-7616 Engine Oil Filter Gp 
Item  Qty  Part  Specification Description 
242-3864 Spring  Length under test force is 43.18 mm (1.700 inch)
Test force is 43.7 N (9.8 lb).
Free length after test is 58.50 ± 0.50 mm (2.303 ± 0.020 inch).
2P-4304 Hollow Stud  Torque to 68 ± 7 N·m (50 ± 5 lb ft)
Length for applying red Loctite 271 to the threads of the hollow stud is 10.0 ± 1.5 mm (0.39 ± 0.06 inch)

Caterpillar Information System:

950H and 962H Wheel Loaders Electrohydraulic System Relief Valve
C9.3 Tier 4 Final Engines Engine Oil Filter Base
AD45B Underground Articulated Truck Cooling System Pressure Cap - Clean/Replace
AD45B Underground Articulated Truck Cooling System Level - Check
AD45B Underground Articulated Truck Cooling System Coolant Extender (ELC) - Add
AD45B Underground Articulated Truck Cooling System Coolant Additive (DEAC) - Add
AD45B Underground Articulated Truck Cooling System Coolant (ELC) - Change
AD45B Underground Articulated Truck Cooling System Coolant (DEAC) - Change
992K Wheel Loader and 854K Wheel Dozer Power Train Oil Filter (Power Train Charging System)
992K Wheel Loader Electrohydraulic System Diagnostic Code List
992K Wheel Loader and 854K Wheel Dozer Power Train Temperature Sensor (Transmission Sump Oil)
D3K2, D4K2 and D5K2 Track-Type Tractors Monitoring System System Schematic
C3.4B Engines For Caterpillar Built Machines Electronic Control Module
C9.3 Engines for Caterpillar Built Machines Engine Oil Pan
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder (Logging Machines)
854K Wheel Dozer and 992K Wheel Loader System Pressure - Release
D9T Track-Type Tractor Engine Supplement Water Temperature Regulator - Remove and Install
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Tilt Cylinder (Logging Machines)
950K Wheel Loader and 962K Wheel Loader Steering System General Information (Steering) - Command Control Steering
950K Wheel Loader and 962K Wheel Loader Braking and Hydraulic Fan System General Information (Brake, Hydraulic Fan System)
992K Wheel Loader and 854K Wheel Dozer Power Train STIC Control
2011/08/12 New Monitor Software Is Now Used On Certain Cat Product {7490, 7620}
Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288} Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}
Bench Test Procedure for a D5R, D5T, and D6N Track-Type Tractor Transmission with Differential Steering {3030, 3073, 3139} Bench Test Procedure for a D5R, D5T, and D6N Track-Type Tractor Transmission with Differential Steering {3030, 3073, 3139}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.