Valve Mechanism Cover Base - Remove and Install
开始:
- 拆下电子单体喷油器。 请参阅拆解和组装, "电子单体喷油器 - 拆卸"。
Show/hide table
图 1 | g01052887 |
- 拆下管组件 (1)。
- 拆下螺栓 (2)(图上未显示)和气门机构盖底座 (3)。
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | Loctite 243 | - |
- 定位气门机构盖底座 (3)。 将工具 (A)涂抹在螺栓 (2)(图上未显示)的螺纹上,然后安装螺栓 (2)(图上未显示)。
- 安装管组件 (1)。
Show/hide table
图 2 | g01052887 |
结束:
- 安装电子单体喷油器。 请参阅拆解和组装, "电子单体喷油器 - 安装"。
Caterpillar Information System:
3508C, 3512C and 3516C Marine Engines Cylinder Head - Remove
3512C and 3516C Engines Direct Fuel Control Mode
C15 and C18 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C15 and C18 Generator Set Engines Engine Speed Sensor - Remove and Install
C3.3 Industrial Engine Fuel System - Inspect
C3.3 Industrial Engine V-Belts - Remove and Install
C3.3 Industrial Engine V-Belt - Test
C3.3 Industrial Engine Glow Plugs - Test
C15 and C18 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
C15 and C18 Generator Set Engines Crankshaft Rear Seal - Remove
C15 and C18 Generator Set Engines Valve Mechanism Cover - Remove and Install
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Operating Parameters - Set
3512C and 3516C Engines Electrical Power Supply
C15 and C18 Generator Set Engines Fuel Temperature Sensor - Remove and Install
C15 and C18 Generator Set Engines Fuel Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Camshaft Position Sensor - Remove and Install
C9 Industrial Engines Reference Material
3512C and 3516C Engines Emergency Stop Switch (Remote)
24M Motor Grader Machine Systems Alarm (Action)
C15 and C18 Engines for Caterpillar Built Machines E539 High Intake Manifold Air Temperature
C15 and C18 Generator Set Engines Crankshaft Position Sensor - Remove and Install
3512C and 3516C Engines Engine Control Switch (ECS)
3512C and 3516C Engines Engine Speed/Timing Sensor
Electronic Injector Height Adjustment and Setting{1251, 1290} Electronic Injector Height Adjustment and Setting{1251, 1290}