Correction to Disassembly and Assembly , "Hydraulic Tank - Disassemble" {5056}
- Underground Articulated Truck:
- AD30 (S/N: DXR263-UP)
The existing information in this module has been updated. Add the following supplemental information to the module that is referenced.
Disassembly Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1P-1861     | Retaining Ring Pliers     | 1     |
Start By:
Remove the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank - Remove"
- Remove breaker relief valve (1) from the hydraulic tank.
Show/hide table
Illustration 1 | g01334374 |
- Remove two lock nuts (2) and drain assembly (3) from the hydraulic tank.
Show/hide table
Illustration 2 | g01331986 |
Show/hide table
Illustration 3 | g01331990 |
- Remove 36 bolts (7) .
Show/hide table
Illustration 4 | g01332473 |
- Remove cover (6) and the gasket from tank assembly (4) .
- Remove filler cap (5) .
- Remove two locking bolts (8) and sight glass assembly (9) from cover (6) .
Show/hide table
Illustration 5 | g01332478 |
- Remove two O-ring seals (10) from retainer (13) .
Show/hide table
Illustration 6 | g01332933 |
- Remove glass (11) and grommet (12) as an assembly.
- Remove glass (11) from grommet (12) .
- Remove plate (14) .
- Remove four locking bolts (16) and sight glass assembly (15) from tank assembly (4) .
Show/hide table
Illustration 7 | g01332894 |
- Remove four O-ring seals (21) from retainer (20) .
Show/hide table
Illustration 8 | g01107018 |
- Remove grommet (17) and glass (18) as an assembly from retainer (20) .
- Remove glass (18) from grommet (17) .
- Remove plate (19) from retainer (20) .
- Remove two bolts (22), tube assembly (23) and the gasket from tank assembly (4) .
Show/hide table
Illustration 9 | g01332934 |
- Remove four bolts (26) and tube assembly (34) .
Show/hide table
Illustration 10 | g01332935 |
- Remove the O-ring seal from tube assembly (34) .
- Remove six bolts (24) and cover (25) .
- Remove O-ring seal (27) from cover (25) .
- Remove screen assembly (29) .
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Depress valve seat (31) by hand and use Tooling (A) (not shown) to remove retaining ring (30) .
- Remove valve seat (31), valve (28), spring (32) and spring (33) .
Caterpillar Information System:
2006/12/11 Correction to the Parts Manual {1718, 1906, 1912, 1917, 1923, 1924, 1928}
C4.4 and C6.6 Engines for Caterpillar Built Machines Injector Trim File
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Engine Crankcase Breather - Clean
657G Wheel Tractor-Scraper Auger Hydraulic System Pump Rotating Group
906H, 907H and 908H Compact Wheel Loaders Stopping the Engine if an Electrical Malfunction Occurs
D6K Track-Type Tractor Electrohydraulic Power Train Charge Relief Valve - Adjust
D6K Track-Type Tractor Electrohydraulic Power Train Crossover Relief Valve - Adjust
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
Field Installation of the Payload Control System{7494} Field Installation of the Payload Control System{7494}
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
D6K Track-Type Tractor Machine Systems Piston Pump (Winch) - Assemble
D6K Track-Type Tractor Machine Systems Piston Pump (Winch) - Disassemble
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Indicator Lamp Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Mode Selection Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Set Speed Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Speed/Timing Sensor Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Throttle Switch Circuit - Test
906H, 907H and 908H Compact Wheel Loaders Work Tool Operation
906H, 907H and 908H Compact Wheel Loaders Hydraulic System Oil Sample - Obtain
906H2, 907H2 and 908H2 Compact Wheel Loaders Steering Column Spline (HMU Steering) - Lubricate
C4.4 and C6.6 Engines for Caterpillar Built Machines Fuel Dilution of Engine Oil
657G Wheel Tractor-Scraper Auger Hydraulic System Pump Control Valve (Pressure Compensator)
657G Wheel Tractor-Scraper Auger Hydraulic System Relief Valve (Piston Pump)
2007/01/22 An Improved Auxiliary Water Pump is Used {1361, 1371}