Electronic Control Module (ECM) - Configure
Follow these instructions to get to the configuration screen:
- Connect the communications adapter and the computer to the diagnostic service tool connector.
- Start the Caterpillar Electronic Technician (ET).
Show/hide table
Illustration 1 g01158599 - Select "File". Go to "Select ECM". Choose the "Implement ECM".
- Go to the "Service" Menu. Select "Configuration". Click "OK". Certain operations or characteristics can be changed.
Show/hide table
| |
| Illustration 2 | g01158600 |
Show/hide table
| |
| Illustration 3 | g01158615 |
The parameter for the raise kickout can be changed with the Caterpillar Electronic Technician (ET). The parameter can be changed from enabled to disabled.
The parameter for the lower kickout can be changed with the Caterpillar Electronic Technician (ET). The parameter can be changed from enabled to disabled.
Rackback Kickout Enable Status
The parameter for the rackback kickout can be changed with the Caterpillar Electronic Technician (ET). The parameter can be changed from enabled to disabled.
Caterpillar Information System:
657G Wheel Tractor-Scraper Fuel System - Prime
Improving the Environment of the Operator{7301} Improving the Environment of the Operator{7301}
973C Track-Type Loader Engine Crankcase Breather - Clean
980H Wheel Loader Electrohydraulic System MID 082 - CID 0357 - FMI 13
980H Wheel Loader Electrohydraulic System MID 082 - CID 0357 - FMI 06
980H Wheel Loader Electrohydraulic System MID 082 - CID 0357 - FMI 05
980H Wheel Loader Electrohydraulic System MID 082 - CID 0357 - FMI 03
966H and 972H Wheel Loaders Machine Systems Tilt Lever - Install
966H and 972H Wheel Loaders Machine Systems Tilt Lever - Remove
2005/04/18 Improvements to the Radiator Guard Are Now Used {7155}
2005/04/11 Correction to Troubleshooting "Fuel Actuator" {1716}
980H Wheel Loader Electrohydraulic System MID 082 - CID 0350 - FMI 13
980H Wheel Loader Electrohydraulic System MID 082 - CID 0359 - FMI 03
980H Wheel Loader Electrohydraulic System MID 082 - CID 0359 - FMI 05
980H Wheel Loader Electrohydraulic System MID 082 - CID 0359 - FMI 06
2005/04/04 Improved Air Conditioner Compressor Guard is Now Used {1805}
973C Track-Type Loader Engine Oil Level - Check
631G Wheel Tractor-Scraper Hitch - Inspect
973C Track-Type Loader Engine Oil Sample - Obtain
657G Wheel Tractor-Scraper Fuel System Primary Filter (Water Separator) Element - Replace
AD45B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0585 - FMI 08
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
AD45B Underground Articulated Truck Power Train Electronic Control System MID 027 - CID 0585 - FMI 02
2005/04/04 Improved Alternator Drive Guard is Now Used {7174}