Pilot Control Actuator (Hoist Lower)
Show/hide table
 | |
| Illustration 1 | g03688800 |
(1) 188-3365 Stabilizing Spring
-
Test Step 1.
- Test force ... 21 ± 0.5 N (4.7 ± 0.15 lb)
- Length under force ... 46.5 mm (1.83 inch)
- Free length after test ... 54.5 mm (2.15 inch)
- Length under force ... 46.5 mm (1.83 inch)
-
Test Step 2.
- Test force ... 65.6 ± 3.8 N (14.7 ± 0.85 lb)
- Length under force ... 29.5 mm (1.16 inch)
- Free length after test ... 54.5 mm (2.15 inch)
- Length under force ... 29.5 mm (1.16 inch)
(2) 141-5498 Spring
- Test force ... 138 ± 11 N (31.0 ± 2.5 lb)
- Length under force ... 43 mm (1.7 inch)
- Free length after test ... 77.5 mm (3.05 inch)
- Length under force ... 43 mm (1.7 inch)
(3) 141-5497 Spring
- Test force ... 192.6 ± 15.4 N (43 ± 3.5 lb)
- Length under force ... 40 mm (1.6 inch)
- Free length after test ... 64.1 mm (2.52 inch)
- Length under force ... 40 mm (1.6 inch)
(4) 173-4012 Spring
- Test force ... 3.9 N (0.9 lb)
- Length under force ... 11 mm (0.43 inch)
- Free length after test ... 11.6 mm (0.46 inch)
- Length under force ... 11 mm (0.43 inch)
Show/hide table
 | |
| Illustration 2 | g03688802 |
(5) Refer to Specifications, "Coil (Hoist)".
(6) 154-4133 Cartridge Assembly
Torque for cartridge assembly ... 35 ± 3 N·m (26 ± 2 lb ft)
Caterpillar Information System:
988H Wheel Loader C18 Engine Supplement Hood and Engine Enclosure - Remove
D7R Series II Track-Type Tractor Engine Supplement Water Pump (Separate Circuit Aftercooler) - Install
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Piston Pump (Steering) - Install
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Piston Pump (Steering) - Remove
988H Wheel Loader C18 Engine Supplement Refrigerant Compressor - Remove and Install
D7R Series II Track-Type Tractor Engine Supplement Water Pump (Separate Circuit Aftercooler) - Remove
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Electronic Control Module (ECM)
988H Wheel Loader C18 Engine Supplement Engine - Install
C11 and C15 Engines for Caterpillar Built Machines E096 High Fuel Pressure
2013/09/02 A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
D10R Track-Type Tractor Hydraulic System Hydraulic Pump - Gear
C11 and C13 Engines for Caterpillar Built Machines Fan Drive Mounting Group - Remove and Install
AD30 Underground Articulated Truck Hydraulic System Pilot Control Actuator (Hoist Raise)
C4.4 Industrial Engine Overspeed
C11 and C13 Engines for Caterpillar Built Machines Alternator - Remove and Install
973D Track-Type Loader Cooling System Water Temperature Regulator - Clean/Replace
994F Wheel Loader Hydraulic System Oil Filter (Steering Pump Case Drain) - Replace
C11 and C13 Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Factory Passwords
994F Wheel Loader Hydraulic System Oil Level (Implement) - Check
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Fuel System Operation
994F Wheel Loader Hydraulic System Oil Level (Brake Cooling) - Check
994F Wheel Loader Steering System Oil Filter (Steering Cooler Screen) (Brake Cooler Screen)
525C, 535C and 545C Wheel Skidders Transmission Oil Level - Check