D6N Track-Type Tractor Hydraulic System Caterpillar


Ripper Control Valve

Usage:

D6N AKM



Illustration 1g01073096

(1) Installation torque for two nuts ... 11 ± 2 N·m (97 ± 18 lb in)

(2) Torque for valve ... 68 ± 2 N·m (50.0 ± 1.5 lb ft)

(3) Torque for valve ... 68 ± 2 N·m (50.0 ± 1.5 lb ft)

(4) Installation torque for four bolts ... 8.2 ± 1.5 N·m (72.5 ± 13.0 lb in)

(5) 6E-4317 Spring

Free length after test ... 50.4 ± 1.25 mm (2.0 ± 0.05 inch)
Outside diameter ... 14.2 mm (0.56 inch)

(6) Torque for plugs ... 14 ± 2 N·m (124.0 ± 17.8 lb in)

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Fuel Filter and Water Separator
988H Wheel Loader Steering System Relief Valve (Steering Pilot, Implement Pilot) - Test and Adjust
D5N Track-Type Tractor Hydraulic System Pressure Reducing Valve - Test and Adjust
AD45B Underground Articulated Truck Power Train Relief Valve (Torque Converter Outlet) - Assemble
AD45B Underground Articulated Truck Power Train Relief Valve (Torque Converter Outlet) - Disassemble
AD45B Underground Articulated Truck Machine Systems Gear Pump (Secondary Steering) - Assemble
AD45B Underground Articulated Truck Machine Systems Gear Pump (Secondary Steering) - Disassemble
D5N Track-Type Tractor Hydraulic System Location of Hydraulic Components
988H Wheel Loader Steering System Pump Performance (Steering) - Test
C11 and C13 Engines Fuel Filter Base
992G, 992K, 994, 994D and 994F Wheel Loaders VIMS Loader Payload System Target Bucket Weight Entering
834H Wheel Dozer and 836H Landfill Compactor Power Train Relief Valve (Transmission Hydraulic Control)
D6N Track-Type Tractor Hydraulic System Bulldozer Tilt Control Valve
C27 and C32 Engines for Caterpillar Built Machines Cylinder Block
C11 and C13 Industrial Engines Electronic Unit Injector Rocker Arm
D6N Track-Type Tractor Hydraulic System Implement Control Valves
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
988H Wheel Loader Power Train Temperature Sensor (Transmission Charge Oil)
D10T Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
D10R Track-Type Tractor Engine Supplement Piston Motor (Fan Drive) - Disassemble - ATAAC
D10R Track-Type Tractor Engine Supplement Piston Motor (Fan Drive) - Assemble - ATAAC
D5N Track-Type Tractor Hydraulic System Equipment Control Valves
D5N Track-Type Tractor Hydraulic System Bulldozer Lift Control Valve
D5N Track-Type Tractor Hydraulic System Bulldozer Tilt Control Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.