2002/10/07 Caterpillar

Wheel Loader:

924G (S/N: AAN1-UP; 9SW1-UP; 3PZ1-UP)

924GZ (S/N: AAB1-UP; 6YW1-UP; 3DZ1-UP)

Systems Operation/Testing and Adjusting, RENR3505, "924G and 924Gz Wheel Loaders Powertrain", "Transmission Clutch Running Clearance - Check". This module is part of Service Manual, RENR3502.

Replace the information in Table 10 with the following information.

Table 10

Running Clearance (A) for Clutch Pack
Clutch	Clearance of New Clutch	Maximum Clearance of Used Clutch
Forward Low	3.67 ± 1.60 mm (0.144± 0.063 inch)	7.69 mm (0.303 inch)
Forward High	3.50 ± 1.38 mm (0.138 ± 0.054 inch)	6.18 mm (0.243 inch)
Reverse	3.67 ± 1.60 mm (0.144 ± 0.063 inch)	7.69 mm (0.303 inch)
First gear	3.62 ± 1.87 mm (0.143 ± 0.074 inch)	8.98 mm (0.354 inch)
Second gear	4.50 ± 1.54 mm (0.177 ± 0.061 inch)	7.85 mm (0.309 inch)
Third gear	4.50 ± 1.54 mm (0.177 ± 0.061 inch)	7.85 mm (0.309 inch)