Pivot Shaft Oil Level - Check
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
Show/hide table
Illustration 1 | g00644181 |
The oil plugs are located on both sides of the machine on top of the track roller frame.
- Remove the oil plug on one side of the machine. Check the oil level. The oil level should be at the bottom of the threaded hole.
- If necessary, add oil in order to bring the oil level up to the bottom of the threaded hole.
Reference: See Operation and Maintenance Manual, "Lubricant Viscosities" in this manual for the correct viscosity grade.
- Install the oil plug.
- Repeat Steps 1 through 3 on the other side of the machine.
Caterpillar Information System:
2002/11/18 A New Radiator and a New Shroud are Used {1353, 7272}
D6R Series II Track-Type Tractor Engine Oil and Filter - Change
3516B Engine for Caterpillar Built Machines Throttle Position Sensor
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0444 - FMI 06
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0444 - FMI 05
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0444 - FMI 03
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0368 - FMI 04
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 1295 - FMI 03
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0363 - FMI 06
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0363 - FMI 05
IT38G Series II Integrated Toolcarrier and 938G Series II Wheel Loader MID 081 - CID 0363 - FMI 03
3516B Engine for Caterpillar Built Machines Digital Sensor Supply
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 1295 - FMI 05
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 1295 - FMI 06
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Temperature Switch (Axle Oil Monitoring)
3516B Engine for Caterpillar Built Machines Prelubrication System
3054E Industrial Engine Alternator and Regulator
3054E Industrial Engine Electric Starting Motor
3054E Industrial Engine Engine Oil Bypass Valve
D6R Series II Track-Type Tractor Hydraulic System Bulldozer Angle Control Valve - If Equipped
AD30 Underground Articulated Truck Steering System Secondary Steering System
AD30 Underground Articulated Truck Steering System Diverter Valve (Secondary Steering)
AD30 Underground Articulated Truck Indicators
3516B Engine for Caterpillar Built Machines Engine Fan Control Solenoid