Ejector Carrier Rollers - Check/Adjust
Park the machine on level ground. Lower the bowl and close the apron.
Check the adjustment for the ejector carrier rollers. The ejector carrier rollers are correctly adjusted if the ejector does not contact the bottom of the bowl.
The ejector carrier rollers are located at the bottom rear of the ejector.
Show/hide table
Illustration 1 | g00102197 |
- Loosen roller shaft clamping bolt (1) .
- Move eccentric roller shaft (2) to a position that allows the ejector to pass over the bottom of the bowl. The ejector carrier rollers must be adjusted so that the clearance between the bottom of the ejector and the bottom of the bowl is between 1.0 to 13.0 mm (.40 to .51 inch).
- Tighten roller shaft clamping bolt (1) .
- Repeat Step 1 through Step 3 in order to adjust the other ejector carrier rollers.
- Start the engine. Move the ejector forward and backward. Stop the engine.
- Check for drag between the ejector and the bottom of the bowl. Repeat the adjustment procedure, if necessary.
Caterpillar Information System:
992G Wheel Loader and 854G Wheel Dozer Steering System Pressure Switch (Primary Steering Oil)
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Secondary Steering)
561M Pipelayer Idlers (Track)
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Steering Cylinder Crossover)
992G Wheel Loader and 854G Wheel Dozer Steering System Check Valve (Steering Pilot)
631E Series II Wheel Tractor-Scrapers Draft Arm Wear Plates - Check/Adjust
651E Wheel Tractor-Scraper Draft Arm Flange Bolts - Check
561M Pipelayer Drawbar
D5M Track-Type Tractor Power Train Fender
515 Wheel Skidder and 525 Wheel Skidder Conventional Coolant/Antifreeze Cooling System Maintenance
D6M Track-Type Tractor Power Train Platform
651E Wheel Tractor-Scraper Differential and Final Drive Oil Level - Check
992G Wheel Loader and 854G Wheel Dozer Steering System Check Valve (Steering Oil Cooler Bypass)
651E Wheel Tractor-Scraper Ejector Carrier Rollers - Inspect/Pack/Replace
992G Wheel Loader and 854G Wheel Dozer Steering System Relief Valve (Pump Backup)
992G Wheel Loader and 854G Wheel Dozer Steering System Selector and Pressure Control Valve (Steering)
D6M Track-Type Tractor Ripper Linkage and Cylinder Bearings - Lubricate
651E Wheel Tractor-Scraper Ejector Guide Rollers - Check/Adjust
992G Wheel Loader and 854G Wheel Dozer Steering System Steering Cylinder
D6M Track-Type Tractor Power Train Cab Mounting
D5M Track-Type Tractor Power Train Rollover Protective Structure (ROPS)
651E Wheel Tractor-Scraper Ejector Support Rollers - Check/Adjust
D6R Track-Type Tractor Cooling System Extended Life Coolant - Change
D6R Track-Type Tractor Cooling System Extended Life Coolant Extender - Add