Product Lifting
Show/hide table
 | |
| 图 1 | g00103219 |
Show/hide table
| 注意 |
|---|
千万不要折弯吊环螺栓和支架。 吊环螺栓和支架只能承受张力负荷。 要记住当支承构件和物体之间的角度小于90°时，吊环螺栓的承载能力变小。 当必须在某一角度搬移部件时，只能使用具有适当额定载荷的连杆支架。 |
使用起重机拆卸重的部件。 使用一个可以调节的吊粱起吊发动机。 所有的承载构件(链条和钢丝绳)应互相平行。 链条和钢丝绳与被吊物体的顶面尽可能保持垂直。
有些拆卸工作要求用吊装工具吊装，以确保平衡和安全。
只在拆卸发动机时，要使用发动机上的吊耳。 如果吊耳缺失，请参阅零件手册中的正确吊耳和螺栓。
吊耳是为特定的发动机配置而设计的。 吊耳是在制造发动机时安装的。 改动吊耳和/或发动机会使吊耳和吊具失效。 如果对吊耳和/或发动机作过改动，则应确保提供合适的起吊装置。 有关发动机正确起吊的吊具资料，请与卡特彼勒代理商联系。
Caterpillar Information System:
2003/12/01 Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01 Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15 Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
3406E and C15 Marine Engines Camshaft - Install
2003/11/01 New Start/Stop Relay Is Now Being Used on 3412C PEEC Generator Sets {4493}
3406E and C15 Marine Engines Camshaft - Remove
C18 Marine Engines Plate Locations and Film Locations
C18 Generator Set Product Description
Caterpillar On-Highway Diesel Engine Fluids Recommendations General Fuel Information
3406E and 3456 Generator Set Engines Coolant Level Sensor
3116 and 3126 Marine Engines Product Storage
Bench Test Procedure for Vane Pumps {5055} Bench Test Procedure for Vane Pumps {5055}
C7 Marine Engine Product Storage
2003/11/01 An Improved Piston is Used {1214}
2004/04/01 A New Waterproof Tachometer is Available {7450, 7462}
G3500 Engines Customer Parameters Worksheet
C32 Marine Engine Safety Messages
C32 Marine Engine Model View Illustrations
2003/12/01 A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123}
C32 Marine Engine Engine Description
G3500 Engines Replacing the ECM
2004/03/01 Ordering a Replacement Machine Identification Plate {7405, 7557}
G3520C and G3520E Generator Set Engines Water Pump - Disassemble
G3520C and G3520E Generator Set Engines Water Pump - Assemble